GE 16, 18, 17 About the fresh food compartment shelves, Temperature Control Dial on some models

Page 5

About the temperature control dial.

GEAppliances.com

Turning the dial to 0/ Off stops cooling in both compartments—fresh food and freezer. It does not shut off power to the refrigerator.

Temperature Control Dial (on some models)

The temperature control dial has nine settings plus 0. 1 is the warmest. 9 is the coldest. At first, set the dial at 5.

After using the refrigerator, adjust the dial if necessary. Insert a coin into the slot in the middle of the dial and you can turn the dial to the setting that is best suited to your needs.

Allow 24 hours for the refrigerator to get cold.

Temperature Control Dial (on some models)

The temperature control dial adjust refrigerator from warmest to coldest.

The recommended factory setting is shown in illustration to the left. For colder temperature turn dial clockwise toward snowflake. For warmer temperature turn dial counter clockwise away from snowflake. allow 24 hours for adjustment.

About the fresh food compartment shelves.

Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.

2 Lift up and out

1 Tilt up

Half-Width Shelves

One end of the shelf rests on a molded side- wall support; a bracket on the other end hooks into a track on the rear cabinet wall.

To remove, lift the shelf up at front, then off the support and out of the track.

To replace, select desired shelf height. With shelf front raised slightly, hook the bracket’s top lug into the track, then lower the shelf onto the support.

NOTE: The shelf to the right of the track is designed to hook into the right-hand slot; the shelf to the left is designed to hook into the left-hand slot.

Lift rear

Pull forward

To remove the full-width shelves

Full-Width Shelves

Some models have a steel wire sliding shelf, a stationary tempered glass shelf,

a spillproof shelf or two steel wire stationary shelves. These shelves can be moved to another place in the fresh food compartment.

The full-width sliding shelf has stop-locks. When placed correctly on the shelf supports, the shelf will stop before coming completely out of the refrigerator and will not tilt when you place food on it or remove food from it.

Lift rear

Pull forward and down

To remove a full-width shelf when the fresh food compartment door cannot be opened fully

Spillproof Shelves (on some models)

Spillproof shelves have special edges to help prevent spills from dripping to lower shelves. To remove or replace the shelves, see the above instructions.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Write the model and serial numbers here Model # Serial # Canadian Customers Warranty for U.S. CustomersRefrigerants Before You Throw Away Your Old Refrigerator or FreezerRéfrigérants  Démontez les portes Éloignez les doigts des parties du réfrigérateur  Do not refreeze frozen foods which have thawed completely N’entreposez et n’utilisez pas d’essence ou Conservez CES Directives About the fresh food compartment shelves Temperature Control Dial on some modelsHalf-Width Shelves Full-Width ShelvesAbout the storage drawers About the freezer compartment shelvesFruit and Vegetable Drawers Snacks DrawerAbout the automatic icemaker Care and cleaning of the refrigerator Refrigerator Location Before YOU BeginClearances Rollers and Leveling LegsPower drill Or adjustable wrench Installing the Water Line on Some ModelsBefore YOU Begin What YOU will NeedDrill the Hole for the Valve Shut OFF the Main Water Supply and Unplug RefrigeratorFasten the Shutoff Valve Route the TubingConnect the Tubing To the Refrigerator Installing the Water LineTurn the Water On AT Shutoff Valve Plug in the RefrigeratorImportant Notes Reversing the Door SwingTools Required Remove the Freezer DoorSet the door outside-up on a non-scratching surface Reversing the HardwareReversing the Door Handles Reinstall the fresh food door handleTransfer fresh food door handle Transfer door stopTransfer Freezer Door Handle RE-HANGING the DoorsRe-hang the fresh food door Re-hang the freezer doorWhoosh Before you call for service…Refrigerator does not Freezer compartment CompartmentBin cause the icemaker To shut off Level cubes by handOn will damage the water valve Not been connected Cubes too smallThis warranty is in addition to any statutory warranty What is covered How Long Warranted Parts LabourCompressor Evaporator, condenserConsumer Product Ownership Registration For refrigerators installed in the U.S Consumer Product Ownership Registration What GE Will Not Cover GE Will ReplaceSuite 310, 1 Factory Lane Consumer SupportCanada, call
Related manuals
Manual 6 pages 60.96 Kb Manual 24 pages 52.76 Kb Manual 88 pages 30.71 Kb Manual 48 pages 54.68 Kb

16, 17, 18 specifications

General Electric (GE) is known for its longstanding tradition of innovation and engineering excellence, encompassing a wide array of products across various industries. Among its notable offerings are its GE 18, 17, and 16 series of gas turbines, designed for power generation. These turbines exemplify technological advancement, efficiency, and reliability in modern energy production.

The GE 18 series, often referred to as the 7HA.02, is a high-efficiency gas turbine that achieves a thermal efficiency of over 64%. This series utilizes advanced materials and manufacturing processes, enabling it to withstand higher temperatures and pressures, thereby maximizing performance. With its ability to operate on a varied mix of fuels, including natural gas and low heating value gases, the GE 18 series stands out for its versatility. Its modular design simplifies maintenance, allowing for shorter downtimes and enhanced operational availability.

The GE 17 series, known as the 7F.05, offers a robust solution for mid-range power generation. With an efficiency rating around 58%, the 17 series is designed for both simple cycle and combined cycle applications. One of its key features is the incorporation of advanced aerodynamics in its turbine blades, which contributes to lower emissions and higher output. Additionally, the GE 17 series comes equipped with digital technologies, such as GE’s Digital Wind Farm and asset performance management tools, allowing operators to monitor and optimize performance in real time.

The GE 16 series, also called the 9FB, is known for its flexibility and high reliability in power generation. It boasts an efficiency rate of approximately 60% when operated in combined cycle mode. The 16 series is designed for easy integration into existing facilities, making it an ideal choice for upgrades and expansions. Its advanced combustion technology minimizes nitrogen oxide emissions, complying with stringent environmental regulations. Furthermore, the GE 16 series employs advanced sensors and control systems that enhance operational efficiency and safety, ensuring it remains a competitive option in the market.

In summary, GE's 18, 17, and 16 series gas turbines represent the forefront of power generation technology, offering unmatched efficiency, flexibility, and environmental performance. Each series is engineered with unique features to cater to different operational needs, ensuring that GE continues to play a pivotal role in the energy landscape. With ongoing innovations and a commitment to sustainability, GE remains a leader in the gas turbine market.
Top Page Image Contents