GE 18, 17, 16 Reversing the Door Handles, Transfer fresh food door handle, Transfer door stop

Page 15

Installation Instructions

4REVERSING THE HARDWARE (CONT.)

4.2Interchange hinge and screws at top right with screws at top left of cabinet. Do not tighten screws on hinge side at this time.

Installing the hinge on the left. Installing the hinge on the right.

NOTES:

Some hinges have four holes. Which holes you use for installing the hinge depends on which side you install the hinge.

The outer edge of the hinge should be parallel to the edge of the case for correct installation.

5REVERSING THE DOOR HANDLES (CONT.)

5.1.3Remove plug button from the top hinge hole on the left side of the door and insert it into the hole on the opposite side that was vacated by removal of the top hinge.

Plug Button

5.1.4Pull the plug button from the front of the door and transfer it to the opposite side.

 

To reattach the

Plug Button

handle on the

opposite side.

 

5REVERSING THE DOOR HANDLES

5.1 Transfer fresh food door handle

5.1.1 Remove the handle plug using a tape-tipped

putty knife under the edge, and remove the screw

5.2Transfer door stop

5.2.1Move the plastic door stop and screws from the right side to the left side.

underneath. Remove the two screws holding the

handle to the top of the door.

Top

Plastic Door Stop

Left Side

Right Side

Plug

5.2.2Move the metal door stop from the right side to the left side and transfer the screw to the opposite side of the door.

5.1.2Remove the handle.

Left Side

Metal Door Stop

Right Side

 

5.3 Reinstall the fresh food door handle

5.3.1Attach the handle to the right side of the

door with screws at the top and under the handle plug.

5.3.2Reinstall the handle plug.

15

Image 15
Contents Write the model and serial numbers here Model # Serial # Canadian Customers Warranty for U.S. Customers Démontez les portes Before You Throw Away Your Old Refrigerator or FreezerRefrigerants Réfrigérants Do not refreeze frozen foods which have thawed completely  N’entreposez et n’utilisez pas d’essence ou Éloignez les doigts des parties du réfrigérateur Conservez CES Directives Full-Width Shelves Temperature Control Dial on some modelsAbout the fresh food compartment shelves Half-Width ShelvesSnacks Drawer About the freezer compartment shelvesAbout the storage drawers Fruit and Vegetable DrawersAbout the automatic icemaker Care and cleaning of the refrigerator Rollers and Leveling Legs Before YOU BeginRefrigerator Location ClearancesWhat YOU will Need Installing the Water Line on Some ModelsPower drill Or adjustable wrench Before YOU BeginRoute the Tubing Shut OFF the Main Water Supply and Unplug RefrigeratorDrill the Hole for the Valve Fasten the Shutoff ValvePlug in the Refrigerator Installing the Water LineConnect the Tubing To the Refrigerator Turn the Water On AT Shutoff ValveRemove the Freezer Door Reversing the Door SwingImportant Notes Tools RequiredSet the door outside-up on a non-scratching surface Reversing the HardwareTransfer door stop Reinstall the fresh food door handleReversing the Door Handles Transfer fresh food door handleRe-hang the freezer door RE-HANGING the DoorsTransfer Freezer Door Handle Re-hang the fresh food doorFreezer compartment Compartment Before you call for service…Whoosh Refrigerator does notNot been connected Cubes too small Level cubes by handBin cause the icemaker To shut off On will damage the water valveEvaporator, condenser What is covered How Long Warranted Parts LabourThis warranty is in addition to any statutory warranty CompressorConsumer Product Ownership Registration For refrigerators installed in the U.S Consumer Product Ownership Registration What GE Will Not Cover GE Will ReplaceConsumer Support Canada, callSuite 310, 1 Factory Lane
Related manuals
Manual 6 pages 60.96 Kb Manual 24 pages 52.76 Kb Manual 88 pages 30.71 Kb Manual 48 pages 54.68 Kb

16, 17, 18 specifications

General Electric (GE) is known for its longstanding tradition of innovation and engineering excellence, encompassing a wide array of products across various industries. Among its notable offerings are its GE 18, 17, and 16 series of gas turbines, designed for power generation. These turbines exemplify technological advancement, efficiency, and reliability in modern energy production.

The GE 18 series, often referred to as the 7HA.02, is a high-efficiency gas turbine that achieves a thermal efficiency of over 64%. This series utilizes advanced materials and manufacturing processes, enabling it to withstand higher temperatures and pressures, thereby maximizing performance. With its ability to operate on a varied mix of fuels, including natural gas and low heating value gases, the GE 18 series stands out for its versatility. Its modular design simplifies maintenance, allowing for shorter downtimes and enhanced operational availability.

The GE 17 series, known as the 7F.05, offers a robust solution for mid-range power generation. With an efficiency rating around 58%, the 17 series is designed for both simple cycle and combined cycle applications. One of its key features is the incorporation of advanced aerodynamics in its turbine blades, which contributes to lower emissions and higher output. Additionally, the GE 17 series comes equipped with digital technologies, such as GE’s Digital Wind Farm and asset performance management tools, allowing operators to monitor and optimize performance in real time.

The GE 16 series, also called the 9FB, is known for its flexibility and high reliability in power generation. It boasts an efficiency rate of approximately 60% when operated in combined cycle mode. The 16 series is designed for easy integration into existing facilities, making it an ideal choice for upgrades and expansions. Its advanced combustion technology minimizes nitrogen oxide emissions, complying with stringent environmental regulations. Furthermore, the GE 16 series employs advanced sensors and control systems that enhance operational efficiency and safety, ensuring it remains a competitive option in the market.

In summary, GE's 18, 17, and 16 series gas turbines represent the forefront of power generation technology, offering unmatched efficiency, flexibility, and environmental performance. Each series is engineered with unique features to cater to different operational needs, ensuring that GE continues to play a pivotal role in the energy landscape. With ongoing innovations and a commitment to sustainability, GE remains a leader in the gas turbine market.