Setting up your French Door Refrigerator

SETTING UP THE REFRIGERATOR

Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your Refrigerator should be fully operational.

1.Place the Refrigerator in an appropriate location with reasonable clearance between it and the wall. Refer to installation instructions in this manual. (page 9, selecting the best location for the Refrigerator)

2.Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3.Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly chilled and the motor will run smoothly.

4.After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the Refrigerator after the temperature is sufficiently cool.

Check the accessories listed below.

Compression fitting

Compression nut

Hex Wrench

Fastener

Disassembling the fridge door

WARNING Be careful not to drop and scratch the fridge door while removing the fridge door!

	Socket wrench	01SETTING
	Socket wrench	UP
		UP
	Top Table

1. Remove the 3 screws holding	2. Disconnect electric wire on the	3. Remove the 3 hex bolts that
down the top table and remove	top of the refrigerator.	hold the hinge on the top of
it.		the refrigerator with the 10mm
		socket wrench.

Required Tools (Not provided)

Phillips screwdriver(+) Flat-blade screwdriver(-)	Socket Wrench	Hex Wrench (3/16”)	Pliers
	(10mm) (for bolts)	(for Mid hinge)

REMOVING THE REFRIGERATOR DOORS

ground wire

4.Remove the screw that holds the ground wire with a philips screwdriver(+).

5.Separate the hinge from the electric wire and ground wire as shown above.

6.Lift the door straight up to remove.

Be careful not to drop and scratch the doors while removing them.

Some installations require door/drawer removal to transport the Refrigerator to its final location.

Do not remove the door/drawer if it is not needed. Before removing the door/drawer make sure you read following items.

WARNING Disconnect power to the Refrigerator before removing the door or drawer.

•Be careful not to drop, damage or scratch the door/drawer while removing them.

•Be careful not to get injured while removing the door/drawer.

•Reattach the door/drawer properly to avoid:

-Moisture from air leakage.

-Uneven door alignment.

-Wasting energy due to improper door seal.

Disassembling the freezer door (DRAWER TYPE - RF217,RF197)

Middle Hinge	Allen wrench

1. Separate the cap on the middle	2. Remove the screw attached to the left and right middle hinges with a
hinge.	philips screwdriver(+).
	Remove the 2 hex head bolts attached to the left and right middle
	hinges with an allen wrench(3/16”).

10_ setting up

setting up _11

RF197ACRS, RF197ACWP, RF197ACBP specifications

The Samsung RF197ACBP, RF197ACPN, RF217ACWP, RF217ACBP, and RF217ACRS are part of Samsung's innovative refrigerator lineup that combines state-of-the-art technology with modern design aesthetics. These models embody efficiency, style, and convenience, making them ideal for contemporary kitchens.

One of the main features across these models is their spacious interior, designed to offer ample storage with flexible organization options. The refrigerators provide adjustable shelves that can be moved to accommodate large items or unique shapes, ensuring maximum usability of the space. With a generous capacity, families can store everything from beverages to bulk grocery items with ease.

Samsung's Twin Cooling Plus technology sets these models apart from conventional refrigerators. This system utilizes separate cooling systems for the refrigerator and freezer compartments, preventing odor transfer and maintaining optimal humidity levels. This not only keeps food fresher for longer but also enhances the overall efficiency of the appliance, reducing energy consumption.

Another notable technology is the Energy Star certification, which signifies that these models meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This is not only beneficial for the environment but also helps consumers save on their energy bills.

Convenience features are also prominent in these refrigerators. The RF217 series, for example, comes equipped with an external water and ice dispenser, offering easy access to chilled water and ice without opening the fridge. This feature is perfect for quick hydration, especially during hot months or when entertaining guests.

The sleek design of these refrigerators complements modern kitchen decors, featuring clean lines and a sophisticated finish. The stainless steel exterior is fingerprint resistant, making maintenance easier and ensuring that your appliance looks pristine day after day.

Additionally, several of these models are equipped with a digital display, allowing users to monitor and control temperature settings easily. Some models feature a built-in alarm system that alerts users if the door has been left open or if the temperature rises unexpectedly, adding an extra layer of food preservation and safety.

In summary, the Samsung RF197ACBP, RF197ACPN, RF217ACWP, RF217ACBP, and RF217ACRS refrigerators are characterized by their spacious design, cutting-edge Twin Cooling Plus technology, energy efficiency, user-friendly features, and modern aesthetics. These appliances not only enhance the kitchen experience but also prioritize food safety and freshness for households.