Samsung RF267AB user manual Getting Ready to Install the Refrigerator, Setting UP the Refrigerator

Setting up your French Door Refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers.

Selecting the best location for the Refrigerator

• A location with easy access to the water supply.

• A location without direct exposure to sunlight.

•A location with level (or nearly level) flooring.

• A location with enough space for the Refrigerator doors to open easily.

• Allow sufficient space for air circulation of the internal cooling system.

If the Refrigerator does not have enough space, the internal cooling system may not work properly.

First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc.

The following chart details the exact height and depth of Samsung French Door Refrigerator.

	MODEL		RF267AB
	Capacity(Cu.Ft)		26
	Width		35 ¾
	Case Height	with Hinge	70
Dimensions		without Hinge	68 ⅝
(inch)
		with Handle	35 ⅝
	Depth
			29 ⅛
		without Door

•Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.

•Do not install the Refrigerator where the temperature will go below 50 ºF (10 ºC).

When installing, servicing, or cleaning behind the refrigerator, be sure to pull

CAUTION the unit straight out and push back in straight after finishing.

Also, make sure your floor supports the full-load regrigerator.

Otherwise, it may cause floor damage.

SETTING UP THE REFRIGERATOR

Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your Refrigerator should be fully operational.

1.Place the Refrigerator in an appropriate location with reasonable clearance between the wall and the Refrigerator. Refer to installation instructions in this manual.

2.Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3.Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly chilled and the motor will run smoothly.

4.After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the Refrigerator after the temperature is sufficiently cool.

8_ Setting Up