REMOVING THE REFRIGERATOR DOORS
How to disassemble/assemble the Arctic Select Zone Door
1) Open the Arctic Select Zone Door. | 2) Take out the box in the Arctic Select |
| Zone Door. |
3)Locate the eight phillips screws in the Arctic Select Zone. To lift the door up, unscrew the eight phillips screws(➀) four turns. Do not remove the screws (➀) out.
(You don’t need to unscrew the
4) Remove the door carefully from the rail lifting up | 5) Slide the rail carefully to the inside. | |
the door with both hands. |
| |
To allow screw(➀) heads to pass through the rail |
| |
holes. |
| |
|
|
|
INSTALLATION INSTRUCTIONS
When you assemble the Arctic Select Zone Door, follow the instructions above in reverse order.
NOTE
27