INSTALLATION OF THE WATER DISPENSER LINE
3)Important Facts About Your Dispenser :
Do not add ice from trays or bags to the storage bin. It may not crush or dispense well.
Avoid overfilling glass with ice and use of narrow or
Beverages and foods should not be
To keep dispensed ice from missing the glass, put the glass close to, but not touching, the dis- penser opening.
Some crushed ice may be dispensed even though you selected CUBES. This happens occasionally when a few cubes accidentally get directed to the crusher.
After crushed ice is dispensed, some water may drip from the chute.
4)Water Supply to the Icemaker :
The icemaker must be connected to a cold water line.
5)Start the Icemaker :
Set the type of ice to the "Cubed Ice" or "Crushed Ice" position. The icemaker will not begin to oper- ate until it reachs its operating of 10.4°F(
• If there is no water supply, turn off the icemaker to save energy.
NOTE • In lower water pressure conditions, the water valve may turn on up to 3 times to make sure enough water reaches the icemaker.
• Allow the appliance to stand for 2hours after installation.
WARNING
Use only the ice maker provided with the refrigerator.
36