Samsung RFG237AARS user manual Using the ice Dispenser, Using the ice off Function

Operating _25

Using the ice Dispenser

Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.

Please wait 2 seconds before removing the glass under the dispenser to prevent spills. CAUTION If the Refrigerator door opens, the Dispenser does not work.

•When Cubed Ice is selected after using the Crushed Ice mode, a small amount of

CAUTION residual crushed ice might be produced.

•If ice doesn’t come out, pull out the ice bucket and press the test button

CAUTION	located on the right side of ice maker.
	• Do not press the test button continuously when the tray is filled with ice or water.
	Water may overflow or ice jamming may occur.

•Normal Use

To fill the ice bucket to maximum capacity after installation, make sure to do the following steps.

PUSH

Check the

water level

02 OPERATING

1. Allow your refrigerator to operate and cool down for 24 hours(or 1 full day).

2.	Waiting 24 hours will allow your ice maker to cool properly.
		Test button
3.	Dispense 4 to 6 ice cubes into the glass.

4. After 8 and 16 hours, dispense a full glass of ice.

When you dump the ice from the ice bucket, you should press the dispenser lever

CAUTION	once with the ‘ICE CUBED’ or ‘CRUSHED’ function ON to get new ice faster after
	replacing the ice bucket in the refrigerator.

If you use all the ice at once, steps 3 and 4 above must be repeated (before dispensing the first 4 to 6 ice cubes, you need to wait for 8 hours). This will replenish the ice cubes and ensure maximum ice production.

Using the ice off Function

When selecting the Ice Off mode, remove all ice cubes from the bucket. If you are not using the ice dispenser, the ice cubes may clump together.

Pull the lock lever forward to throw away ice cubes or remove clumped ice from the bucket. Push the bucket back until you hear a click.

Use only the ice maker provided with the refrigerator. The water supply to this refrigerator must only be installed/connected by a suitably qualified person and

CAUTION connect to a potable water supply only.

In order to operate the ice maker properly, water pressure of 20~125 psi (138~862 kPa) is required.

If you have a long vacation or business trip and won’t use water or ice dispensers, close the water valve. -. Otherwise, water leakage may occur.

Wipe excess moisture from inside and leave the doors open. -. Otherwise, odor and mold may develop.

Do not put your fingers,	hands or	any other unsuitable objects in the chute or ice-maker bucket.
- It may result in personal injury or material damage.
Never put your finger or	any other	objects in the dispenser opening.
- It may cause injury.

Do not try to disassemble the ice maker.

Do not wash or spray the ice bucket with water.

Water clouding phenomenon

All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this process, the pressure in the water that has flowed out of the filter gets increased, and oxygen and nitrogen become saturated. When this water flows out in the air, the pressure plummets and the oxygen and nitrogen get supersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles.The water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.

Please wait 1 second before removing the cup after dispensing water to prevent water dribble. Do not pull out the lever dispenser after taking out ice or water. It comes back automatically. Ice is made in cubes. When you select “Crushed”, the ice maker grinds the ice cubes into crushed ice.

DA68-01827C-16.indb 25 2013. 12. 10.

�� 5:01