Using the control panel
Freezer Temp ( 1 ) indicates the current freezer temperature. Fridge Temp ( 2 ) indicates the current refrigerator temperature.
If you do not press any button, freezer & fridge temperature indicator will turn off in a few seconds. If any button is pressed, the display will light up again.
1 | 2 |
10
( 10 ) Filter |
(Blue) (Red) (Reset the indicator)
Water filter usage
1.Normally the filter indicator is Blue (Yellow Green) when you purchase or install our refrigerator.
2.If you use water about 270 gallons, the filter indicator will be Light Pink.
3.If you use water about 300 gallons, the filter indicator will be Red.
4.Remove the old water filter and install new one when the filter indicator is red. And reset the filter indicator by pressing Alam/Hold 3 sec for Filter Reset button for 3sec. (The filter indicator will be blue or yellow green when the indicator is reset.)
•If water is not dispensing or dispensing slowly, you need to replace water filter.
Because the water filter clogged.
•Some area has a lot of lime water.It makes water filter clog quickly.
Changing the water filter
The Filter light let you know when it is time to change your water filter cartridge.
To give you preparation time to get a new filter, the red light will come on just before the capacity of the current filter runs out.
Changing the filter on time provides you with the freshest, cleanest water from your refrigerator.
1. Trun the water filter ( 1 ) about 1/4 turn,
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
(Red)
• To change the water filter more easily, shut off the water supply valve.
2
1
•Sometimes, it is hard to disassemble the water filter because of impurities in water. In this case, put the grip of water filter and pull it hard.
26_ Operating