CHANGING THE INTERIOR LigHtS
Before changing any of interior lights, unplug the Refrigerator from the power supply. If you are unsure CAUTION about changing the lights after reading through these directions, contact your service center for help.
Replacement LED is available from your nearest service center. If you need to change LED, contact Samsung Parts distributor.
Changing the Interior Light in the Refrigerator
1.Unplug the power cord from the wall outlet.
2.Remove the screw after removing the cover lamp by pulling it out.
3.Disconnect the housing connector.
4.Change the LED lamp.
Cover lamp | Housing connector |
Changing the Interior Light in the Freezer Drawer
1. Unplug the power cord from the wall outlet.
2. Remove the pull out drawer. Refer to ‘Remove super extended drawer’ in the manual(on page 36).
3.Pull the shield down while pushing it bakwards to remove it.
4.Disconnect the housing connector.
5.Change the LED lamp from the cover lamp.
Do not place your fingers inside the cover. The lamp may be hot.
CAUTION
40_ Operating