Samsung Official Manual for Setting Up Your French Door Refrigerator

Setting up your French Door Refrigerator

GEttinG READy to instALL tHE REFRiGERAtoR

Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art

features and efficiencies that this new appliance offers.

Selecting the best location for the refrigerator

•A location with easy access to the water supply.

•A location without direct exposure to sunlight.

•A location with a leveled floor.

•A location with enough space for the refrigerator doors to open easily.

•Allow sufficient space for air circulation of the internal cooling system.

If the refrigerator does not have enough space, the internal cooling system may not work properly.

2 inch

33/4 inch 2 inch

If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

When you install the refrigerator next to a fixed wall, minimum clearance is 3 ¾” (95mm) between the refrigerator and wall to allow the door to swing open.

First thing! Make sure that you can easily move your refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc.

The following chart details the exact height and depth of Samsung							B
							A
French Door Refrigerator.
Model	Depth	Width	Height	Overall	Depth		E
	“A”	“B”	“C”	Height “D”	“E”	C
							D
RFG238AA /	28”	35 3/4”	69 5/8”	69 3/4”	30 1/2”
RFG237AA	(71.2cm)	(90.8cm)	(176.9cm)	(177.4cm)	(77.4cm)

•Allow clearance to the right, left, back and top when installing.

This will help reduce power consumption and keep your energy bills lower.

•Do not install the refrigerator where the temperature will go below 10ºC (50ºF).

•Do not locate the refrigerator where it may become wet.

	When moving your refrigerator
CAUTION	To prevent floor damage be sure the front adjusting
	legs are in the up position(above the floor).
	Refer to ‘Adjusting the doors’ in the manual
	(on page 15).

Flat-blade screw driver(-) Control Lever

FLOORING

For proper installation, this refrigerator must be placed on a leveled surface of hard material that is the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 660lbs(299kg). To protect the finish of the flooring, cut a large section of the cardboard carton and place under the refrigerator where you are working. When moving a refrigerator, it is needed to pull and push in the back-and-forth direction.

8_ Setting Up