CD/MP3-CD Operation
English
Important!
The lens of the CD player should never be touched.
Loading a disc
This CD player plays Audio Discs including CD Recordables,
●
1Press SOURCE on the top of the system to select CD or press CD on the remote.
2Press 0 to open the CD compartment.
➜ OPEN is displayed when the compartment cover slides up.
3Insert a disc with the printed side facing up. Press 0 again to close the compartment.
➜ CLOSE is displayed followed by READ DISC as the CD player scans the contents of a disc, and then playback starts automatically.
Basic playback controls
To play a disc
●Press ÉÅ to start playback.
➜ The current track number and elapsed playing time of the track are displayed during disc playback.
To select a different track
●Press the control knob on the front panel to the left or right (corresponding to S/T) or press S/T on the remote once or repeatedly until the desired track number appears in the display.
●You can also use the Numerical Keypad (0~9) on the remote to select a track directly.
●To input a number larger than 10, press SHIFT on the remote once or more to select the first digit you want and then use the Numerical Keypad (0~9) to input the second digit.
●If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will need to press ÉÅ to start playback.
Text display during playback In CD mode
●Press DISPLAY/MENU on the remote control repeatedly to see the following information.
➜Track number and elapsed playback time of current track.
➜Track number and remaining playback time of current track.
➜Track number and total remaining playback time.
In
●Press DISPLAY/MENU on the remote control to display the
18