Clock/Timer
Setting the clock
1In Standby mode, press and hold CLOCK on the remote until the time flashes on the display. ➜ ”SET CLOCK” is displayed briefly.Then, the hour digits flash on the display screen.
2Turn VOLUME
3Press CLOCK to confirm.
➜ The minute digits flash on the display screen.
4Turn VOLUME
5Press CLOCK again to confirm the clock setting.
Notes:
–This system only supports 12-hour mode.
–The clock setting will be erased when the system is disconnected from the power supply.
–The system will exit clock setting mode if no button is pressed within 30 seconds.
Viewing the clock
●Press CLOCK in the active mode. ➜ The clock time is displayed.
Setting the timer
●The system can be used as an alarm clock, whereby the CD, USB,TUNER, AUX is switched on at a set time.The clock time needs to be set first before the timer can be used.
●During setting, if no button is pressed within 30 seconds, the system will exit timer setting mode automatically.
1Press and hold SLEEP/TIMER on the remote control until the time flashes on the display.
➜ ”SET TIMER” is displayed briefly.Then, the hour digits flash on the display screen.
2Turn VOLUME
3Press SLEEP/TIMER to confirm.
➜ The minute digits flash on the display screen.
4Turn VOLUME
5Press SLEEP/TIMER to confirm the time setting.
➜ ”OFF” flashes on the display screen.
6Turn VOLUME
➜ icon appears on the display screen.
To deactivate the timer
●Select “OFF” at Step 6.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off by itself after a set period of time.
●Press SLEEP/TIMER on the remote control.
➜The display shows one of the sleep time options in the following sequence:
●To deactivate, press SLEEP/TIMER on the remote control once or more until OFF is shown, or press
➜SLEEP disappears.
English
27