Samsung RSG257AA user manual InstALLinG tHE wAtER LinE, Installing the water filter

setting up your side-by-side refrigerator

instALLinG tHE wAtER LinE

Connecting the water line to the Refrigerator.

There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store.

• 1/4” compression nut	• plastic tubing	Plastic tubing
• copper tubing	• ferrule		Compression nut
		(Supplied)
			(1/4”) (Supplied)
		Need to purchase	Compression fitting
			(Supplied)
			Compression nut
			(1/4”) (Not supplied)
			Plastic tubing
		Ferrule	(Not supplied)
		(Not supplied)
		Copper tubing
		(Not supplied)

1.Slip the compression nut through the supplied plastic tubing .

2.Tighten the compression nut onto the 1/4” compression fitting.

-If you are using copper tubing, slip the compression nut (not included) and ferrule (not included) on copper tubing (not included) as shown.

-If you are using plastic tubing , insert the molded end of the plastic tubing into the compression fitting.

3.Tighten the compression nut onto the compression fitting. Do not over-tighten the compression nut .

4.Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you get a snug, leak-free connection.

Installing the water filter.		1
Before installing the water filter, please remove the		1
top shelf.
1. Remove the water filter cover( 1 )
2. Remove the fixed cap by turning it counter
clockwise. Keep the cap in a safe place for later use
if you don’t use a filter.	2	3
3. Remove the water filter from the box and put a
replacement indicator sticker on the filter as shown.
Place a sticker on the filter that dates six months
in the future. For example, if you install the water
filter in March, put the “SEP” sticker on the filter to		Sticker
remind you to replace in September. That way you’ll
		(month indicator)
know when it is time to replace the filter. Normally, a
filter life is about 6 months.

16_ setting up