Samsung RSE8F, RSE8N, RSE8B manual Installing the Water Dispenser Line, Secure the water line

Page 31

INSTALLING THE WATER DISPENSER LINE

Connect the water line to the refrigerator.

- Remove the compressor cover of the refrigerator.

CONNECTION NUT

- Connect the water line to the valve, as shown in the figure.

WATER LINE

 

- When connected, check if there is any leakage.

 

If any, repeat the connection.

 

- Reattach the compressor cover of the refrigerator.

 

 

COMPRESSOR COVER OF

 

REFRIGERATOR

Secure the water line.

-Using clip ”A”, fix the water line to the wall (the back of refrigerator).

-When the water line is secure, make sure whether the water line is not excessively bent, pinched or squashed. Complete the installation of the water supply line.

-Power on the refrigerator and press the lever on the right of the

dispenser until water runs out through the water line and all air has been empty.

-At this time, check for any possible leakages at the join point in the water line. After securing the water line, move the refrigerator to the required location. Once the refrigerator is in position, do not move possibly.

CLIP A

WATER LINE

Install the water filter.

-As shown, separate the fixed cap in the refrigerator by rotating it counterclockwise.

Remove the water filter from the box and put a month indicator sticker on the filter as shown.

-Write the month you installed the filter on the label. EX) If the water filter was installed in March, put “MAR”

-Remove the protective cap then position and insert the filter as shown,

-Slowly turn the water filter clockwise 90º to align the indication mark on the

cover, locking the filter in postion. Do not overtighten.

SEPARATION

OF RED CAP

STICKER

(MONTH INDICATION)

COVER FILTER

ALIGN THE INDICATION MARK WITH LOCK POSITION.

CAUTION Please check if the indication line aligns with the lock position.

30

Page 30 Page 32
Image 31
Page 30 Page 32
Contents OWENER’S Manual and Installation Contents Safety Precautions Safety InstructionsHOW to Connect Electricity Read and Follow this Safety Information Carefully Initial Operating Condition Major FeaturesRSE8B/N* Model RSE8K/J/V* Model RSE8F/D* Model Control PanelTemperature setting Temperature ControlDigital Panel Power FreezeCold Water Ice DispenserPush the ice dispenser lever with a cup Water DispenserRefrigerator Shelves and BinsPlastic Drawer Food Storage GuideTempered Glass Shelf Door BinChilled Food Storage in Refrigerator Cool Soft FreezeZero Zone 0oC Quick Cool600 g ThawRemoving the Freezer Accessories Cleaning the Accessories Deodorizer Changing the Interior LightWater Filter Water Filter Indicator lightUsing the dispenser without the water filter Ordering replacement filtersChecking the Dimensions of your Entrance Door Installation of the RefrigeratorSelecting the Location for the Refrigerator Removing the Front Leg Cover Removing the Front LEG CoverSeparating the water supply line from the refrigerator Removing the Freezer Door Removing the Refrigerator DoorsRemoving the Refrigerator Door Reattaching the Freezer Door Reattaching the Refrigerator DoorsReattaching the Refrigerator Door Reattaching the Front Leg Cover Optional Reattaching the Water TubeDoors will be uneven if the refrigerator is not level Please level the refrigerator firstAdjust the Clearance Between the Doors Checking the Parts Connecting to water supply lineCheck the water supply line Connect the water line to the refrigeratorInstall the water filter Installing the Water Dispenser LineSecure the water line Remove any residual matter inside the water supply line Check the amount of water supplied to the ice trayBefore YOU Call for Service On some models Small or hollow cubesSlow ice cube freezing Workon some modelsEnglish Memo Memo
Top Page Image Contents