OPERATION
Touch control panel
To operate, touch the keys with your bare hand.
Features start automatically like right <Standby display> figure when inserting the power plug.
(At first, Door alarm and Sound are
“ON”.)
1 . Display for temperature setting
The preset temperature of selected compartment is displayed. It is not the actual temperature in the compartment.
2 . Display for feature icon
The icon 
and 
are displayed on the standby display when each feature is in operation.
Plasmacluster
Energy saving
Controlling temperature
(Freezer compartment)
Controlling temperature
(Refrigerator compartment)
3 . Door alarm indication
This indication shows door alarm “ON”.
1 | 2 | 5 | 6 | 7 |
4 3
4 . Sound ON/OFF indication
This indication shows sound “OFF”.
5 . Select key
Press to select feature icon and door alarm signal.
6 . 
/ 
key
Press to select feature ON/OFF or temperature setting.
7 . 
(Enter) key
Finalize the setting.
NOTE
•When there is no operation for 1 minute, the display automatically return to the standby display.
Additionally, the display will be turned off when there is no operation for 1 minute.
•When either of the key is pressed, the icons will blink once and show the standby display.
When the refrigerator stops with power failure, the display shows similarly as before having a power failure at the time of
Plasmacluster
The ionizer inside your refrigerator releases clusters of ions, which are collective masses of positive and negative ions, into the refrigerator compartment. These ion clusters inactivate airborne mould fungus.
mould
fungus
To start operation
1 Press the select key and select Plasmacluster icon.
Flashing
2 Press the 
key. [ 
: ON, 
: OFF ]
To cancel operation
It is the same method as starting operation.
Press the 
key in step 2.
NOTE
•There may be a slight odour in the refrigerator. This is the smell of ozone generated by the ionizer. The amount of ozone is minimal, and quickly decomposes in the refrigerator.
3 Press the 
key.
5