External Sources
English
Connecting external equipment
1Connect the audio out terminal of the portable device (i.e. iPod or MP3 player) to the MP3
LINK terminal of your system.
2Press SOURCE once or more to select MP3 LINK.
© "MP3 in" is displayed.
Note:
–All the sound control features (DSC or DBB, for example) are available for selection.
–Refer to the operating instructions for the connected equipment for details.
Clock/Timer
Setting the clock
1In standby mode, press and hold DISPLAY/ CLOCK.
©7KHFORFNGLJLWVIRUWKHKRXUVÁDVK
2Press PRESET +/- í/ë (í/ë on the remote) to set the hours.
3Press DISPLAY/CLOCK.
©7KHFORFNGLJLWVIRUWKHPLQXWHVÁDVK
4Press PRESET +/- í/ë (í/ë on the re- mote) to set the minutes.
5Press DISPLAY/CLOCKWRFRQÀUPWKHWLPH
Note:
–If the last selected source is
Setting the sleep timer
The sleep timer enables the system to switch off by itself after a set period of time.
1In active mode, press SLEEP on the remote control repeatedly until the desired timer option
appears.
© Selections are as follows (time in minutes): SLPOFF=SLP120=SLP90=SLP60 =SLP45=SLP30=SLP15=SLPOFF
© Display shows 
if activated, and disappears if deactivated.
2To cancel the sleep function, either press SLEEP on the remote control once or more until “SLPOFF” appears, or press STANDBY- ON (y on the remote) to switch to standby mode.
16