Washable Air Filters, To remove the filters

The Middle Fan – The middle fan is especially designed to cool the VGA card and even a dual VGA card configuration. In this case the HDD cage becomes a duct drawing fresh cool air from the front of the case. You can choose to mount only the middle fan or you can mount both the front and the middle fans to enhance the cooling as two fans will serve a push and pull action bringing the air more ef- ficiently.

1.Find the two fan wire brackets from the tool bag.

2.Install the wire brackets into the HDD cage.

3.Clip the fan into position.

In order to build a quieter system we recommend NOT installing the optional fans if not necessary for the cooling of your components. If you choose to install them we recommend using Antec 120mm TriCool™ fans and setting the speed to Low.

Optional rubber grommeted ports

There are two rubber grommeted ports in the rear panel. You can use them to route tubing for external liquid cooling devices.

The Washable Air Filters

There are two filters located behind the front grilles. From time to time it will be necessary to wash the installed air filters. Not washing the air filters will result in higher system temperatures and possible stability problems. We recommend checking the air filter at least once a month initially. The frequency will change depending on environmental conditions and system usage, as users whose systems run 24/7 will likely have to check/wash more often than those who don’t use their systems every day.

To remove the filters:

1.Push one of the fan grilles at the right middle edge to open the grille.

2.There are two tabs on the filter. To remove the filter, use both hands to gently push the tabs downward. Slightly angle the top of the filter towards you before lifting it up and out.

For more useful suggestions and advice on building this case please visit Antec’s FAQ’s on www.antec.com.

P182, P180, P182SE specifications

The Antec P182SE, P180, and P182 are part of Antec's celebrated Performance One series, which is designed to provide users with an optimal balance of form, functionality, and cooling efficiency. These models have gained a loyal following among PC builders and enthusiasts, thanks to their innovative features and user-friendly designs.

The Antec P180, first introduced in the mid-2000s, set the standard for quiet performance and thermal efficiency. Its layout was groundbreaking, featuring a dual-chamber design that separated the heat-producing components from the cooler regions of the case. This configuration helps to optimize airflow and reduce noise, a hallmark of Antec's commitment to silent computing. The P180 supports multiple cooling options, including space for large CPU coolers and dedicated areas for additional fans—all designed to keep temperatures in check while minimizing acoustic output.

Building on the success of the P180, Antec released the P182, which incorporated a few refinements and enhancements. The P182 features improved cable management with additional routing options, enhancing overall airflow and allowing for a cleaner build aesthetic. Moreover, it includes upgrades to the damping material, enhancing acoustic performance even further. With its ability to accommodate both standard and long graphics cards, the P182 remains a versatile choice for gamers and professionals alike.

The P182SE, or Special Edition, is a variant that doubles down on the original DNA of the P182 while offering a few distinctive upgrades. It retains the dual-chamber architecture but introduces updated fan configurations, allowing for even more efficient airflow. The aesthetic appeal of the P182SE is enhanced with a sleek aluminum front panel and an innovative door design that provides easy access to drive bays, while still offering noise-dampening benefits.

All three models support a variety of cooling solutions, including room for multiple 120mm and 140mm fans, while also being compatible with liquid cooling systems. Their support for larger PSU installations minimizes the need for restrictive sizes, giving builders more flexibility. Each case also allows for ample storage options, with multiple hard drive bays that can be configured to suit a user's storage requirements.

With a focus on performance, efficiency, and user experience, the Antec P182SE, P180, and P182 have established themselves as staples in the realm of PC building. Their combination of innovative design, robust construction, and thermal capabilities make them ideal choices for anyone looking to assemble a high-performance, silent system.