Preparations
FM Antenna
1 
2
●For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal.
CSpeakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left
speaker to "LEFT", coloured (marked) wire to "+" and black (unmarked) wire to
●Fully insert the stripped portion of the speaker wire into the terminal as shown.
Notes:
–For optimal sound performance, use the supplied speakers.
–Do not connect more than one speaker to any one pair of +/- speaker terminals.
–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
Optional connection
The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details.
Connecting other equipment to your system
Connect the audio left and right OUT terminals of a TV,VCR, Laser Disc player, DVD player or CD Recorder to the
Note:
–If you are connecting equipment with a mono output (a single audio out terminal), connect it to the AUX IN left terminal. Alternatively, you can use a “single to double” cinch cable (the output sound still remain mono).
Before using the remote control
1Pull out the plastic protective sheet.
2Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD,TUNER).
3Then select the desired function (for example
ÉÅ , í , ë).
plastic protective sheet
Replacing battery (lithium CR2025) into the remote control
1Pull out the knob A slightly to the left.
2Pull out the battery compartment B .
3Replace a new battery and fully insert the battery compartment back to the original position.
CAUTION!
Batteries contain chemical substances, so they should be disposed off properly.
E n g l i s h
11