Blomberg DWS 54100 SS, DWS 54100 FBI Water Supply Connection, Braided HOSE/COPPER Tubing

Page 16

7.1.2 WATER SUPPLY CONNECTION

Water supply may be connected to the dishwasher in one of two ways:

• With metal braided hose.

• With copper tubing.

7.1.3 BRAIDED HOSE/COPPER TUBING

After connections are made turn on the water supply to check for leaks.

CAUTION

•Hot water supply line: Use minimum 3/8” O.D. copper tubing or metal braided dishwasher supply line.

•Temperatures required for soldering and sweating will damage the dishwasher’s water inlet valve so if any such operation is needed, keep the heat source min. 77/8” (200mm) away from the dishwasher’s water inlet valve.

•There should not be any sharp bends in the water line that may restrict the water flow.

•Teflon tape or pipe tread compound must be used for sealing the connection. Before connecting the copper water supply line to the dishwasher, flush it with hot water to clear any foreign material.

Notice :

After connections are made turn on the water supply to check for leaks.

7.2ELECTRICAL CONNECTION WARNING

•Make sure the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent injury and machine damage. Consult a qualified electrician if in doubt.

•Only connect the dishwasher to the mains when all installation and plumbing work is complete.

•Do not use any extension cord or portable outlet device to connect the dishwasher to a power supply.

•The power-supply receptacle for the appliance shall be installed in a cabinet or on a wall adjacent to the undercounter space in which the appliance is to be installed.

•The access hole of the supply cord to the installation compartment must be smooth and rounded and it must be large enough for the attachment plug to pass through. The longest dimension of the opening shall not be more than 1,5” (38 mm).If the partition is metal, it needs to be covered with the edge protector (m).

•Care must be taken when the appliance is installed or removed, to reduce the likelihood of damage to the power-supply cord.

7.2.1GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances. This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.

WARNING

•Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance, if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

13

USA

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Dishwasher Installation Manual For Dishwasher Models Important Safety Instructions Dishwasher SpecificationsPlacement of Dishwasher Into the Opening Installer Checklist Final Instructions Self Help HintsIntroduction HOW to Contact US Inspect the DishwasherTools Which MAY be Needed Materials Which MAY be Needed Parts Supplied Manual BAGDishwasher Parts BAG Parts Attached to the Rear of the DishwasherDishwasher Specifications Technical Features Adjusting Height Preparation for Installing Mounting BracketsEnclosure Preparation Electrical Preparation Warning Installing the Foot Supports T20 Installing the 90 Elbow Fitting B Preparing the Water Connection aDrain Preparation Installing AN AIR GAPDisposal Steam Protection Foil Fitting the Protection FoilPlacement of Dishwasher Into the Opening Drain Hose ConnectionWater Supply Connection Braided HOSE/COPPER TubingReadjusting Foot Levels Adjusting the Movable TOE KickAttach caps s as shown in the supply bags C Installing the Outer Door DWS 54100 FBI 8 3,5mm 16 4mm Adjusting Door Tension with Custom Wooden Door DWS 54100 FBI See also Installer Checklist 17 9872 01 00-AA-USA

DWS 54100 FBI, DWS 54100 SS specifications

The Blomberg DWS 54100 SS and DWS 54100 FBI are two outstanding dishwasher models that exemplify efficiency, performance, and innovative technology. Designed for the modern kitchen, these dishwashers provide advanced functionality that caters to the needs of contemporary households.

One of the standout features of both models is their impressive energy efficiency. Rated with an A++ energy label, the DWS 54100 SS and DWS 54100 FBI ensure lower electricity consumption without compromising on cleaning power. This energy-efficient design not only benefits the environment but also offers significant savings on household bills.

The dishwashers come equipped with an array of wash programs tailored to different needs. The intensive wash option is perfect for heavily soiled pots and pans, while the quick wash feature ensures that lightly soiled dishes are cleaned in record time. Additionally, they include a half-load option, enabling users to run the dishwasher even when it's not fully loaded, optimizing both water and energy usage.

Another noteworthy technology is the unique Sensor program that automatically adjusts the wash cycle based on the load and degree of soiling. This intelligent feature helps to ensure that every wash is both efficient and thorough, providing impeccable cleaning results while conserving resources.

The interior design of the Blomberg DWS 54100 models is equally impressive. With flexible loading options, including adjustable racks and foldable tines, users can easily accommodate different sizes and types of dishes, making it versatile for any kitchen. The holding capacity is generous, allowing for up to 14 place settings, ideal for larger families or entertaining guests.

Noise levels are also a critical consideration, and these dishwashers operate on a quiet level, making them suitable for open-plan living spaces. The sound insulation technology minimizes operational noise, providing a peaceful environment while maintaining cleaning efficiency.

Furthermore, the Blomberg DWS 54100 models boast a sleek and modern design with a stainless steel finish that adds a touch of elegance to any kitchen decor. The user-friendly LED display and intuitive controls make it easy to select the desired program and monitor the progress of each cycle.

In summary, the Blomberg DWS 54100 SS and DWS 54100 FBI are equipped with advanced features and technologies that elevate dishwashing into a seamless and efficient task. From their energy-saving capabilities to their flexible loading options, these dishwashers stand out in the market, making them an excellent choice for anyone seeking reliability and performance in their kitchen appliances.
Top Page Image Contents