Amana T1WG2L ConvertibleDrawer Temperature Control, Crisper Humidity Control, Chilled Door Bin

Page 6

Adjusting Controls

NOTE: Give the refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator. The settings indicated in the previous section should be correct for normal household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

Slide the control one setting to the right to make the compartment colder.

Slide the control one setting to the left to make it less cold.

If you need to adjust temperatures in the refrigerator or freezer, use the settings listed in the chart below as a guide. Wait at least 24 hours between adjustments.

CONDITION/REASON:

ADJUSTMENT:

 

 

REFRIGERATOR too warm

REFRIGERATOR Control

 

one setting higher

 

 

FREEZER too warm/

FREEZER Control

too little ice

one setting higher

 

 

REFRIGERATOR too cold

REFRIGERATOR Control

 

one setting lower

 

 

FREEZER too cold

FREEZER Control

 

one setting lower

Disabling Sounds

To turn off all dispenser and control sounds, press and hold ICE and FILTER at the same time for 3 seconds.

To turn all sounds back on, press and hold ICE and FILTER at the same time for 3 seconds again.

ConvertibleDrawer Temperature Control

The control can be adjusted to properly chill meats or vegetables. The air inside the pan is cooled to avoid “spot” freezing and can be set to keep meats at the National Livestock and Meat Board recommended storage temperatures of 28° to 32°F (-2° to 0°C). The convertible vegetable/meat drawer control comes preset at the lowest meat setting.

To store meat:

Set the control to one of the three MEAT settings to store meat at its optimal storage temperature.

To store vegetables:

Set the control to VEG to store vegetables at their optimal storage temperatures.

NOTE: If food starts to freeze, move the control to the left (less cold). Remember to wait 24 hours between adjustments.

Crisper Humidity Control

(on somemodels)

You can control the amount of humidity in the moisture-sealed crisper. Adjust the control to any setting between LOW and HIGH.

LOW (open) for best storage of fruits and vegetables with skins.

HIGH (closed) for best storage of fresh, leafy vegetables.

Chilled Door Bin

(on somemodels)

Cool air from the freezer is directed to the refrigerator door bin directly beneath the vents.

NOTE: The dairy compartment and can rack are not associated with the Chilled Door Bin feature.

Chilled Door Bin Control

The chilled door bin control is located on the left-hand side of the refrigerator compartment.

A

A. Chilled door bin control

Slide the door chill control to the left to reduce the flow of cold air to the bin and make it less cold.

Slide the door chill control to the right to increase the flow of cold air to the bin and make it colder.

Water and Ice Dispensers

(on somemodels)

Depending on your model, you may have one or more of the following options: the ability to select either crushed or cubed ice, a special light that turns on when you use the dispenser, or a lock option to avoid unintentional dispensing.

NOTES:

The dispensing system will not operate when the freezer door is open.

After connecting the refrigerator to a water source, flush the water system. Use a sturdy container to depress and hold the water dispenser lever for 5 seconds, then release it for

5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser lever (5 seconds on, 5 seconds off) for an additional 2 minutes. This will flush air from the filter and water dispensing system. Additional flushing may be required in some households. As air is cleared from the system, water may spurt out of the dispenser.

Allow 24 hours for the refrigerator to cool down and chill water.

Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

6

Image 6
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Unpack the RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer Water Supply Requirements LocationRequirementsElectrical Requirements Recommended Grounding MethodReverse Osmosis Water Supply Connect Water SupplyWater Pressure Connect to Water LineUsing theControls Complete the InstallationRefrigerator USE Chilled Door Bin ConvertibleDrawer Temperature ControlCrisper Humidity Control Water and Ice DispensersIce Maker and Storage Bin Cleaning Refrigerator CareWater Filtration System Troubleshooting Changing the Light BulbsRefrigerator Operation Temperature and Moisture Ice and WaterWater is leaking from the dispenser AccessoriesWater dispenser will not operate properly Dispenser water is not cool enoughPerformance Data Sheets Application Guidelines/Water Supply ParametersItems Excluded from Warranty Amana Major Appliance WarrantyLimited Warranty This limited warranty does not coverInstructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurInstructions Dinstallation Déballage duréfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Spécifications électriques Exigences demplacementMéthode recommandée de mise à la terre RemarquesPression de leau Spécifications de l’alimentationen eauRaccordement de la canalisation deau Alimentation en eau par osmose inverseAchever l’installation Raccordement au réfrigérateur StyleUtilisation DU Réfrigérateur Utilisation des commandesCommande de température dans le tiroir Convertible Réglage de lhumidité dans lebac à légumesCompartiment fraîcheur dansla porte Distributeurs d’eau et deglaçonsMachine à glaçons et bac dentreposage Système defiltrationde leauEntretien DU Réfrigérateur Remplacement des ampoules d’éclairageRemplacement du filtre à eau NettoyageDépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eauLe distributeur deau ne fonctionne pas correctement AccessoiresLe distributeur de glaçons ne fonctionne pas correctement De leau suinte du distributeurFeuilles DE Données SUR LA Performance Système de filtration deau de la grille de la baseGarantie Limitée Articles Exclus DE LA GarantieLa présente garantie limitée ne couvre pas W10162456A SP PN W10162457A 2008 All rights reserved. Tous droits réservés

T2RFWG2, T1WG2L specifications

The Amana T1WG2L and T2RFWG2 are part of Amana's line of high-efficiency washing machines and dryers, designed to meet the needs of modern households while delivering exceptional performance and convenience. With a suite of advanced features, these appliances are built to make laundry chores simpler and more efficient.

Starting with the Amana T1WG2L washer, this front-loading machine is engineered with a robust set of features tailored to enhance the washing experience. One of its standout characteristics is its high-efficiency design that reduces water and energy consumption, resulting in lower utility bills. The washer is equipped with a variety of wash cycles and options, including delicate, heavy-duty, and quick wash settings, allowing users to customize each load based on fabric type and soil level.

The T1WG2L also incorporates a stainless steel drum, which is designed for durability and performance. This material resists chipping and is less likely to retain odors. Combined with the unit's efficient suspension system, it ensures that clothes come out clean while minimizing wear and tear. Additionally, the washer features an advanced load sensing technology that adjusts water levels according to the size of the load, further enhancing efficiency.

Moving on to the Amana T2RFWG2 dryer, it perfectly complements the T1WG2L with its smart drying capabilities. The dryer is equipped with multiple drying cycles to cater to various fabric types such as towels, delicates, and heavy items. One of the key features is the moisture sensing technology, which intelligently detects moisture levels in the drum and automatically adjusts drying time to prevent over-drying. This not only saves energy but also helps to keep clothes looking their best.

Another significant feature of the T2RFWG2 is its wrinkle-prevent option, which tumbles clothes intermittently after the drying cycle is finished, helping to reduce wrinkles and ironing time. The dryer is also designed with a large capacity, allowing users to dry larger loads at once, making laundry days less tedious.

Both the T1WG2L and T2RFWG2 are designed with user-friendly controls, making them easy to operate even for those unfamiliar with modern washing and drying technology. Their sleek design ensures they fit seamlessly into any laundry room, while their advanced features promote efficiency and convenience.

In summary, the Amana T1WG2L and T2RFWG2 washing machine and dryer combination showcases advanced technology and thoughtful design, making them reliable companions for laundry day. With their focus on efficiency, durability, and ease of use, these appliances are a smart investment for any household looking to simplify its laundry process.