Amana W10366212A Reverse Door Standard Door optional, Cabinet, Refrigerator door, Freezer door

Page 7

3.Starting with the right-hand side door, remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door from the bottom hinge pin.

4.Remove the hinge pin cover from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

5.Before removing the left-hand side door, disconnect the wiring plug located on top of the top hinge by wedging a flat-blade screwdriver or your fingernail between the two sections. See Wiring Plug graphic.

NOTE: The green, ground wire remains attached to the hinge.

6.Remove the parts for the left-hand side door top hinge as shown in the Top Hinge graphic. Lift the door from the bottom hinge pin.

NOTE: Remove the hinge pin cover from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

Reverse Door - Standard Door (optional)

IMPORTANT: If you want to reverse your door so it opens from the opposite side, follow these steps. If you are not reversing the door, see “Replace Door(s) and Hinges.”

Door Stop Screw

Door Handle Seal Screw Front

Flat-Head Handle Screw

Cabinet Hinge Hole Plug

Cabinet

1.Remove hinge screws from handle side and move them to opposite side. See Graphic 1-1.

2.Remove cabinet hinge hole plugs from cabinet top and move them to opposite side hinge holes as shown in Graphic 1-2.

Refrigerator door

1.Remove the refrigerator handle assembly as shown in Graphic 2. Keep all parts together.

2.Remove door handle seal screw front. Move to opposite side of refrigerator door as shown in Graphic 6.

3.Remove the door stop. Move it to the opposite side of the refrigerator door as shown in Graphic 4.

4.Attach the refrigerator handle to the opposite side of the refrigerator door.

NOTE: For models with front mount handles, replace the handle trim as shown in Graphic 2.

5.Tighten all screws. Set aside the door until hinges and freezer compartment door or drawer are in place.

Freezer door

1.Remove freezer handle assembly as shown. Keep all parts together. See Graphic 5-1.

2.Remove freezer door handle seal screw. Move to opposite side of freezer door.

3.Remove door stop. Move to opposite side of freezer door as shown. See Graphic 4.

4.Attach handle to opposite side of freezer door.

5.Tighten all screws. Set the door aside.

6.Remove the base grille by grasping the grille firmly with both hands and pulling it toward you.

NOTE: Place a shim under the bottom front edge of the refrigerator cabinet to take the weight off the roller brackets.

7.Remove the screws from both roller brackets. See Graphic 7.

8.Remove the hinge plate located behind the roller bracket and move it to the opposite side of the refrigerator. Move the hinge pin and shim to the outside hole on the hinge plate. See Graphic 7.

Replace Door and Hinges

Standard Door

NOTE: Graphics may be reversed if door swing is reversed.

Freezer drawer models

1.Replace the parts for the bottom hinge as shown. Tighten screws.

NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

2.Assemble the parts for the top hinge as shown in Top Hinge graphic. Do not tighten screws completely.

3.Adjust the door so that the bottom of the refrigerator door is aligned with the top of the freezer drawer. Tighten all screws.

Freezer door models

1.Make sure the hinge plate is securely fastened behind the roller bracket and that the hinge pin is inserted into the outside hole. Fully tighten all roller bracket screws.

2.Remove the shim that you placed under the front edge of the refrigerator cabinet. Replace the freezer door.

NOTE: Provide additional support for the door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working.

3.Assemble the parts for the center hinge as shown in the Center Hinge graphic, and tighten all the screws. Replace the refrigerator door.

4.Assemble the parts for the top hinge as shown in the Top Hinge graphic. Do not tighten the screws completely.

5.Adjust the doors so that the bottom of the refrigerator door is aligned with the top of the freezer door. Tighten all screws.

French Doors

1.Assemble the parts for the top hinges as shown in Top Hinge graphic. Do not tighten the screws completely.

2.Replace the parts for the bottom hinges as shown in Bottom Hinge graphic. Tighten screws. Replace the refrigerator doors.

NOTE: Provide additional support for the refrigerator doors while the hinges are being moved. Do not depend on the door gasket magnets to hold the doors in place while you are working.

3.Align each door so that the bottom of the refrigerator door aligns evenly with the top of the freezer drawer. Tighten all screws.

4.Reconnect the wiring plug on top of the left-hand side refrigerator door.

5.Replace the top hinge covers.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Refrigerator User Instructions Refrigerator SafetyUnpack the Refrigerator Installation InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Recommended Grounding Method Clean Before UsingLocationRequirements Electrical RequirementsTools Needed Water Supply RequirementsConnect the Water Supply Reverse Osmosis Water SupplyConnect to Refrigerator StyleStandard Door Refrigerator Doors and DrawerFrench Doors Freezer door Reverse Door Standard Door optionalCabinet Refrigerator doorRemove Drawer Front Remove and Replace Drawer HandleReplace Drawer Front Standard Door Door Removal Replacement Door Swing Reversal optionalDrawer Front Removal Drawer Front Replacement Door Closing and Door Alignment Refrigerator USEOpening and Closing Doors To Turn Off/On Using the ControlsCrisper Humidity Control Ice MakerWater Filtration System CleaningRefrigerator Care Water DispenserRefrigerator Operation TroubleshootingTo Clean Your Refrigerator Changing the Light BulbDoors will not close completely Temperature and MoistureTemperature is too warm Ice and WaterRecently dispensed large amount of water? Allow 24 hours Water dispenser will not operate properlyIs the water pressure at least 35 psi 241 kPa? The water Water from the dispenser is warmApplication Guidelines/Water Supply Parameters Performance Data SheetsModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters This limited warranty does not cover Amana Major Appliance WarrantyLimited Warranty Items Excluded from WarrantySécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurNettoyage avant l’utilisation Instructions D’INSTALLATIONDéballage duréfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurMéthode recommandée de mise à la terre Exigences demplacementSpécifications électriques Outillage Requis Spécifications de l’alimentationen eauRaccordement de la canalisation deau Alimentation en eau par osmose inverseRaccordement au réfrigérateur Achever l’installationPorte standard Portes et tiroir du réfrigérateurPorte à deux battants Porte du compartiment de congélation Réinstallation Porte et charnièresCaisse Porte du compartiment de réfrigérationDépose de la façade du tiroir Dépose et réinstallation de la poignée du tiroirRéinstallation de la façade du tiroir Portes à deux battantsPorte standard Inversion du sens douverture de la porte facultatifPortes à deux battants Charnières supérieuresFermeture et alignement de la porte Ouvertureet fermeture des portes Utilisation des commandesHumidity Control Commande dhumidité sur certains modèles Utilisation DU RéfrigérateurMise en marche/arrêt de la machine à glaçons Machine à glaçonsDistributeur d’eau Distribution d’eauNettoyage Remplacement del’ampoule d’éclairageEntretien DU Réfrigérateur Système de filtrationde leauLe moteur semble trop tourner DépannageFonctionnement du réfrigérateur Le réfrigérateur ne fonctionne pasGlaçons et eau Température et humiditéHeures pour la fabrication de nouveaux glaçons Système de filtration d’eau intérieur Feuilles DE Données SUR LA PerformanceModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Éléments Exclus DE LA Garantie Garantie LimitéeLa présente garantie limitée ne couvre pas 2011 All rights reserved. Tous droits réservés W10366212A SP PN W10366213A

W10366212A specifications

The Amana W10366212A is a standout refrigerator designed for modern kitchens, combining efficiency, style, and advanced technology to meet the demands of contemporary households. This model exemplifies the well-established reputation of Amana for producing high-quality home appliances that cater to both functionality and aesthetics.

One of the main features of the Amana W10366212A is its spacious interior. With ample storage space, this refrigerator is equipped with adjustable shelves that can be moved to accommodate various food items, from large casseroles to towering bottles of soda. The refrigerator section also includes crisper drawers that help keep fruits and vegetables fresher for a longer period, ensuring that you can enjoy your groceries without worrying about spoilage.

In terms of technology, the Amana W10366212A features a reliable cooling system that maintains consistent temperatures throughout the fridge and freezer compartments. This ensures that food remains at optimal storage temperatures, prolonging its shelf life. The refrigerator is designed with energy efficiency in mind, which not only helps reduce utility bills but also contributes to environmental conservation.

One of the most notable characteristics of this model is its user-friendly interface. The Amana W10366212A is equipped with easy-to-use temperature controls, allowing users to set the desired cooling levels effortlessly. Additionally, the appliance features a sophisticated air circulation system that minimizes odors by maintaining optimal humidity levels, ensuring that your food tastes fresh.

The exterior of the Amana W10366212A is sleek and modern, available in a variety of finishes to complement different kitchen decors. The fingerprint-resistant stainless steel finish is particularly popular, as it maintains its shine while reducing the visibility of smudges and fingerprints.

Another appealing aspect of this refrigerator is its warranty and customer support. Amana offers robust customer service options, ensuring that if any issues arise, assistance is readily available.

Overall, the Amana W10366212A fridge is a perfect blend of functionality, advanced technology, and stylish design, making it an ideal choice for families looking to upgrade their kitchen appliances without compromising on style or effectiveness.
Top Page Image Contents