Amana D7824703 Install Ice Maker, Models with ice service rack, Models with full freezer shelves

Page 3

Insert screws

5/8" sheet metal screws here

Clips

Install Ice Maker

1.Remove any shelves that may obstruct installation of ice maker module.

Models with ice service rack

Slide ice service rack toward front of freezer until screws are in middle of mounting holes. Gently pull ice service rack away from freezer. Remove screws using a 1/4" hex nut driver. Insert provided plugs into screw holes.

Bottom Freezer models Remove freezer shelf and basket.

Top Freezer models Remove freezer shelf.

2.Install hole plugs to properly position for ice maker.

Models with half-width freezer shelves

Push 2 oblong plugs provided, into 2 lowest shelf slots on left side.

Models with full freezer shelves

Push 1 oblong plug provided, into lowest shelf slot on each side.

3.Remove ice maker from shipping carton and discard packing material.

Important

Ice maker is shipped with arm down. This is correct position for ice production. Do not force arm up or down.

4.Slip stainless steel clip over rear wall of ice maker water cup.

Stainless steel clip

Water cup

5.Remove and discard 3 button plugs from left freezer wall using flat blade screwdriver with blade covered with masking tape.

6.Start 5/8" sheet metal screw in top front hole, and top rear hole in left wall. Leave heads out approximately 3/8".

Important

Ice maker can be installed one way only. Do not drill additional holes.

7.Hold ice maker in position. Verify two outside electrical flats line up with flats in receptacle on freezer back wall. Insert wire harness plug into receptacle on rear wall until locking fingers on plug snap into place. Slip ice maker hanger over sheet metal screw.

Wire harness

Wire harness

receptacle

plug

Sheet metal screw

Ice maker hanger

 

or

Wire harness

Wire harness

plug

receptacle

Sheet metal

 

screw

 

Ice maker

 

hanger

 

8.Ease ice maker water cup toward end of water fill tube. Water fill tube fits under stainless steel clip. Water fill tube must not be kinked. Water fill tube elbow should extend 3/8" into ice maker water cup and must be secured under stainless steel clip.

Stainless

Water fill tube

steel clip

Water

 

cup

 

9.Install remaining 5/8" long sheet metal screw to secure ice maker. Tighten all 3 screws.

10.Reinstall freezer shelf and and any baskets.

11.Position ice storage bucket on freezer shelf under ice maker.

Image 3
Contents Parts Introduction Recognize this symbol as a safety precautionSafety Instructions Before Connecting Ice MakerConnect Water Supply Line ProcedureInstall Water Inlet Tube Tools RequiredModels with full freezer shelves Install Ice MakerModels with ice service rack Models with half-width freezer shelvesOperating Instructions Before Calling For ServiceWarranty Ice Maker Full One Year Warranty

D7824703 specifications

The Amana D7824703 is a standout appliance in the realm of microwave ovens, known for its impressive features and user-friendly design. With a focus on efficiency and versatility, this model caters to a variety of cooking needs, making it an excellent addition to any kitchen.

One of the main features of the Amana D7824703 is its spacious 0.7 cubic feet capacity. This generous interior space allows for the preparation of large meals and multiple dishes simultaneously, which is particularly beneficial for families or those who enjoy entertaining guests. The microwave is designed with a 700-watt cooking power, ensuring that food is evenly heated and thoroughly cooked.

Incorporating advanced technology, the D7824703 features Auto Defrost settings, which simplify meal preparation by allowing users to quickly and accurately defrost various types of food. The microwave also includes pre-programmed settings for popular items such as popcorn, baked potatoes, and pizza, eliminating the guesswork involved in cooking times and temperatures.

The user interface of the Amana D7824703 is intuitive and straightforward. It comes equipped with easy-to-read buttons and a digital display, which help users navigate through the different functions effortlessly. The inclusion of a kitchen timer and a child safety lock adds to the microwave’s practicality, making it suitable for households with young children.

This microwave also boasts a sleek design that fits well with modern kitchen aesthetics. Its stainless steel finish not only enhances the visual appeal but also makes it easier to clean and maintain. Additionally, the compact size allows it to fit conveniently on countertops without occupying too much space, making it ideal even for smaller kitchens.

Energy efficiency is another characteristic that sets the Amana D7824703 apart. With its energy-saving features, users can enjoy the benefits of quick and easy cooking without significant electric costs.

In summary, the Amana D7824703 is a reliable and versatile microwave oven, combining user-friendly technology, ample capacity, and energy efficiency. Whether you’re reheating leftovers or preparing a quick meal, this microwave is designed to meet various cooking needs while enhancing the overall kitchen experience.