Avanti BCA1801B, BCA1800W, RM1702PS, RM1701B, RM1700W instruction manual Care and Maintenance

Page 11

appropriate for home or office use.

?To turn the appliance off, turn the temperature control to ”OFF”.

NOTE:

?Turning the temperature control to “OFF” position stops the cooling cycle but does not shut off the power to the unit.

?If the unit is unplugged, has lost power, or is turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the unit will not start.

?Using Your Ice Cube Tray(Only on models RM1700W / 1701B / 1702PS)

?Recommended thermostat setting for i ce making is position “6”.

?Fill the ice cube tray (two thirds of it) with cold water or with any liquid suitable for freezing and place the tray on the bottom of the chiller compartment to freeze properly.

?Dry the tray, otherwise it may stick to the bottom of the chiller.

?The best method to get ice cubes out of the tray is to hold the tray under cold tap water for a second.

?To eject the ice cubes from the tray, place over the ice bucket and twist slightly

?The Chiller Compartment (Only on Models RM1700W / 1701B / 1702PS)

?This compartment is designed for production of ice cubes and short-term storage (3-4 days at most) of some commercially frozen foods.

?The temperature in this compartment does not get cold enough to freeze food safely for long periods of time and works best when the food is already frozen.

?Be design, this chiller compartment is not a true freezer, and may not keep ice cream frozen, or freeze items.

?A colder setting may be used for these items, but other items in the refrigerator may also be affected.

?The chiller door is susceptible to breaking due to excessive ice build up. This part is not covered under your warranty. Be sure to defrost when the ice reaches 1/4 inch thick.

CARE AND MAINTENANCE

?Defrosting Your Unit (Only on models RM1700W / 1701B / 1702PS)

?Defrost the unit when the frost accumulated on the evaporator is about 5mm (1/5 inch) thick. Set the thermostat dial to “OFF” position.

?Remove frozen or perishable foods from the chiller compartment and place it in a cooler to protect the food.

?During the defrost cycle, the ice melts into the water drip tray.

?To remove the water, either remove the water drip tray and/or place a collection container under the tray. Use a sponge or towel to pick up the melting ice off the unit floor.

?Dry the water collection tray and place back under the chiller compartment. Defrosting usually takes a few hours. After defrosting, return the thermostat dial to the desired position. To defrost quickly remove all foods from the unit and leave the door open. Never use a knife or other metal instrument to scrape ice/frost from the evaporator.

CAUTION:

Do not use boiling water because it may damage the plastic parts. In addition, never use a sharp or metallic instrument to remove frost as it may damage the cooling system and will void the warranty. We recommend using a plastic scraper.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manual DE Instrucciones Your safety and the safety of others are very important Refrigerator SafetyImportant Safeguides ? Promote better products Registration InformationPage Read this guide carefully Help US Help YOUTemperature Control Knob Parts & FeaturesTable of Contents Installation Instructions Important Safety Instructions?Warning? Operating Your UnitCare and Maintenance ? Cleaning Your Unit Problems with Your Refrigerator ? Troubleshooting GuideAvanti Products Customer Services Service for Your RefrigeratorWhat is not Covered What is Covered Limited ONE-YEAR WarrantyLimited Second Through Fifth Year Warranty Wiring Diagram Instalacion Instrucciones EN EspañolSI Usted SE VA DE Vacaciones POR UN Periodo DE 30 Dias O MAS

RM1700W, RM1701B, RM1702PS, BCA1801B, BCA1800W specifications

The Avanti lineup featuring models BCA1800W, BCA1801B, RM1702PS, RM1701B, and RM1700W exemplifies modern refrigeration and cooling solutions tailored to meet diverse consumer needs. These appliances are designed with a blend of innovative technologies and practical features that enhance usability and efficiency.

Starting with the BCA1800W and BCA1801B models, both units boast a compact design ideal for apartments, offices, or dormitories. The BCA1800W, in clean white, features a reversible door, allowing easy access whether it’s placed in a corner or against a wall. The BCA1801B, in a sleek black finish, offers a similarly compact footprint while incorporating adjustable shelves that provide customizable storage options. Both models include a chiller compartment, adjustable thermostat controls, and an energy-efficient design that helps reduce power consumption.

Moving on to the RM1702PS, RM1701B, and RM1700W models, these refrigerators highlight Avanti's commitment to space-saving solutions and versatility. The RM1702PS features a stainless steel finish, providing a modern touch to any kitchen. It includes several shelves and door storage bins for optimal organization. The RM1701B, in classic black, offers dynamic refrigeration technology that helps maintain consistent temperatures, ensuring that food stays fresher for longer periods. The RM1700W, dressed in pristine white, is designed for minimalistic appeal while incorporating a sleek, integrated look.

All five models incorporate advanced insulation technology that enhances energy efficiency while maintaining effective cooling performance. These refrigerators operate quietly, which is a significant benefit for residential environments. Additionally, many of these units feature a separate freezer compartment, allowing for optimal ice and food storage.

In summary, Avanti's BCA1800W, BCA1801B, RM1702PS, RM1701B, and RM1700W models offer a variety of features tailored to consumers seeking efficient and stylish refrigeration solutions. From customizable shelving to energy-saving technology, these appliances are designed to meet the demands of contemporary living while delivering reliability and performance.
Top Page Image Contents