AXIS 211W - System Options
Ports & Devices
I/O Ports - the pinout, interface support and the control and monitoring functions provided by this connector are described in I/O Terminal Connector, on page 36.
LED Settings
The Network Indicator LED can be enabled or disabled, according to requirements and the Status indicator LED can be set to flash at a configurable interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED behavior, see page 7, or the online help.
Note that the Status LED does not flash when the stream is retrieved using
Maintenance
•Restart - The camera is restarted without changing any of the settings.
•Restore - The unit is restarted and most current settings are reset to factory default values. The settings that will not be reset are as follows:
•the boot protocol (DHCP or static)
•the static IP address
•the default router
•the subnet mask
•the wireless settings
•Default - The default button should be used with caution. Pressing this will return all of the camera's settings to the factory default values (including the IP address).
Upgrade Server - See Upgrading the Firmware, on page 40.
Backup - To take a backup of all of the parameters, and any
Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore button. The settings will be restored to the previous configuration.
Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configuration of multiple units or for firmware upgrades.
Support
The Support overview page provides valuable information on troubleshooting and contact information, should you require technical assistance.
System Overview - is a quick look at the camera’s status and settings. Information that can be found here includes the camera’s Firmware version, IP address, Security, Optional Network Services, Event Settings, Image settings and Recent log items. Many of the captions are also links to the proper Setup page to conveniently make adjustments in the camera’s settings.
Logs & Reports - when contacting Axis support, please be sure to provide a valid Server Report with your query.
Information
Logs, Server Report and Parameter List all provide valuable information for troubleshooting and when contacting Axis support.
Configuration
Log Level for Log Files - from the
34
