SETTING THE TEMPERATURE CONTROL
You can control the internal temperature of each side/zone independently by using the control panel for that side.
You can press the left side UP and DOWN buttons/marks to control the internal temperature of each respective side / zone.
The degrees indicators will appear in the display window.
•The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN button/mark once.
NOTE:
•If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the Wine Chiller will not start.
•When you use the wine chiller for the first time or restart the wine chiller after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the wine chiller is running for a few hours everything will be back to normal.
STORAGE
Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able to store may vary.
NOTE: |
|
Capacity: |
|
Wine Chiller / LEFT SIDE / ZONE: | 21 Standard bottles |
Beverage Center / RIGHT SIDE / ZONE: | 54 Cans |
Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML bottles and include bulk storage.
INTERIOR LIGHT
•Interior lights are available in both zones.
•You can turn the interior light on in each zone by pushing the button marked with the “bulb”
symbol 
or touch the mark 
.
The lights will turn off automatically if it remains ON for 10 minutes or more. You have to push the
button marked with the “bulb” symbol 
or touch the mark 
again and the light will turn back on.
CONTROL PANEL LOCK
•Your Wine chiller is equipped with an automatic Control panel lock function. This function will prevent any unwanted changes to your temperature or power settings.
•The lock function will activate automatically 12 seconds after the last time a button is pushed on the control panel.
•To unlock the control panel lock press and hold the (UP) and the (DOWN) buttons for 3 seconds the control panel will beep and blink once indicating that the control panel is active and the settings can be changed.
DOOR LOCK
Your unit is provided with a lock and key combination on each side..
The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.
11