Avanti SBCA017G instruction manual Problems with Your Beverage COOLER?,  Power Failure

Page 10

CAUTION

Failure to unplug the Beverage Cooler could result in electrical shock or personal injury.

Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your Beverage Cooler if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your food.

Vacation Time

Short vacations: Leave the Beverage Cooler operating during vacations of less than three weeks.

Long vacations: If the appliance will not be used for several months, remove all food and unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary.

Moving Your Beverage Cooler

Securely tape down all loose items inside your Beverage Cooler.

Tape the door shut.

Protect the outside of Beverage Cooler with a blanket, or similar item.

Energy Saving Tips

The Beverage Cooler should be located in the coolest area of the room, away from heat producing appliances, and out of the direct sunlight.

Overloading the Beverage Cooler forces the superconductor cooling system to run longer.

Reduce door openings and extended searches, remove as many item as needed at one time, and close the door as soon as possible.

One characteristic of superconductor heat-pipe units is the length of time it requires to recover from having the door opened and shut frequently. It may be necessary to wait longer for the temperature to return to its former level once the door has been opened for too long. This is normal for the type of unit.

PROBLEMS WITH YOUR BEVERAGE COOLER?

You can solve many common Beverage Cooler problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

PROBLEM

POSSIBLE CAUSE

Beverage Cooler does not operate.

Not plugged in.

 

The circuit breaker tripped or a blown fuse.

 

The appliance temperature control is set at “OFF” position.

Beverage Cooler is not cold enough.

The room temperature is hotter than normal.

 

The door is opened too often.

 

The door is not closed completely.

 

The temperature control is not set correctly.

 

The door gasket does not seal properly.

 

The Beverage Cooler does not have the correct clearances.

 

Abnormal voltage.

The light does not work.

Not plugged in.

 

The circuit breaker tripped or a blown fuse.

 

The LED light has burned out.

Vibrations.

Check to assure that the Beverage Cooler is level.

The door will not close properly.

The Beverage Cooler is not level.

 

The door was reversed and not properly installed.

 

The gasket is dirty.

 

The shelves, bins, or baskets are out of position.

10

Image 10
Contents Manual DE Instrucciones Page Table of Contents Beverage Cooler Safety Your safety and the safety of others are very importantImportant Safeguides Parts & Features Important Safety Instructions Installation InstructionsWarning Care and Maintenance Operating Your Beverage CoolerProblems with Your Beverage COOLER?  Power FailureService for Your Beverage Cooler Wiring DiagramWhat is Covered Limited ONE-YEAR Warranty What is not CoveredInstrucciones EN Español InstalacionEconomia DE Energia Registration Information AV02-09072010