Useful Information
Problem | Cause/solution |
I cannot operate the answering | L Someone is using the unit. Wait for the other |
system. | user to finish. |
| L A caller is leaving a message. Wait for the |
| caller to finish. |
| L The handset is too far from the base unit. |
| Move closer. |
I cannot operate the answering | L You are entering the wrong remote access |
system remotely. | code. If you have forgotten your remote |
| access code, enter the remote access code |
| setting to check your current code (page 34). |
| L Press each key firmly. |
| L The answering system is turned off. Turn it on |
| (page 35). |
| L You are using a rotary/pulse telephone. Try |
| again using a |
While recording a greeting | L A call is being received. Answer the call and |
message or listening to | try again later. |
messages, the unit rings and |
|
recording stops. |
|
|
|
Liquid damage |
|
|
|
Problem | Cause/solution |
Liquid or other form of moisture | L Disconnect the AC adaptor and telephone line |
has entered the handset/base | cord from the base unit. Remove the batteries |
unit. | from the handset and leave to dry for at least |
| 3 days. After the handset/base unit are |
| completely dry, reconnect the AC adaptor and |
| telephone line cord. Insert the batteries and |
| charge fully before use. If the unit does not |
| work properly, contact your nearest |
| Panasonic service centre. |
Caution:
LTo avoid permanent damage, do not use a microwave oven to speed up the drying process.
49
