Making/answering calls, intercom | Panasonic KX-TG7341BX specification

TG7331-7341BX(e).book Page 47 Wednesday, August 20, 2008 10:31 AM

	Useful Information

Making/answering calls, intercom

Problem	Cause/solution
w is flashing.	L The handset is not registered to the base unit.
	Register it (page 27).
	L The handset is too far from the base unit.
	Move closer.
	L The base unit’s AC adaptor is not connected.
	Check the connections.
	L You are using the handset or base unit in an
	area with high electrical interference. Re-
	position the base unit and use the handset
	away from sources of interference.
Noise is heard, sound cuts in	L You are using the handset or base unit in an
and out.	area with high electrical interference. Re-
	position the base unit and use the handset
	away from sources of interference.
	L Move closer to the base unit.
	L If you use a DSL/ADSL service, we
	recommend connecting a DSL/ADSL filter
	between the base unit and the telephone line
	jack. Contact your DSL/ADSL provider for
	details.
The handset does not ring.	L The ringer volume is turned off. Adjust ringer
	volume (page 24).
The base unit does not ring.	L The ringer volume is turned off. Adjust ringer
	volume (page 18).
I cannot make a call.	L The dialling mode may be set incorrectly.
	Change the setting (page 15).
	L The handset is too far from the base unit.
	Move closer and try again.
	L Another unit is in use. Wait and try again later.
	L Answering system is being used by another
	handset.*1 Wait and try again later.
	L The key lock feature is turned on. Turn it off
	(page 20).
*1 KX-TG7341

47

Image 47

Panasonic KX-TG7341BX operating instructions Making/answering calls, intercom, Problem Cause/solution

Contents

Model No. KX-TG7331BX Preparation Caller ID ServiceVoice Mail Service Introduction Model composition Product information Additional/replacement accessories Accessory informationFeature differences Supplied accessories Handset optional KX-TGA731BX Expanding your phone system For your safety Base unit location/avoiding noise Important safety instructionsBattery For best performance Routine care Environment KX-TG7331 ControlsBase unit Handset Soft key icons Icon Action DisplayHandset display items Meaning Connections Battery installation and replacementIf you subscribe to a DSL/ADSL service During a power failure Battery charge Auto Talk Symbols used in these operating instructionsWall mounting Display language Turning the power on/offSetting up the unit before use Dialling mode Date and time Handset Setup Time Settings Set Date & Time Making calls Using the handsetUsing the base unit Pause for PBX/long distance service users Changing the base unit ringer tones Adjusting the base unit ringer volumeAnswering calls Auto talk Recall/flash Useful features during a callTemporary tone dialling for rotary/pulse service users Mute Call privacy Handset Handset key lockCall share Editing entries Handset phonebookAdding entries Finding and calling a phonebook entry Copying all entries Copying phonebook entriesChain dial Copying an entry To erase a stored phone number Making a call using the speed dial keysBase unit speed dial Adding phone numbers to speed dial Register H.set Keytones*4 Auto Talk*5 Off Programmable settingsProgramming by scrolling through the display menus Top-menu Sub-menu Base Unit Setup*1 Handset Setup Time Settings Special instructions for programmable settingsAlarm Time adjustment Caller ID subscribers only Operating additional units Registering a unitSelecting area codes to be deleted automatically Changing the base unit PIN Personal Identification Number Deregistering a handset Setting the repeater modeBase Unit Setup Repeater Mode Increasing the range of the base unit Caller list Using Caller ID service Add Phonebook Erasing caller informationStoring caller information to the phonebook Call screening Answering systemTurning the answering system on/off Memory capacity Playing back the greeting message Using a pre-recorded greeting messageGreeting message Recording your greeting message Erasing all messages Listening to messages using the base unitListening to messages using the handset Operating the answering system Editing the number before calling back Calling back Caller ID subscribers onlyAnswer System Erase Message Answering system settings Recording Time For voice mail service subscribersCaller’s recording time Number of Rings Call Screening To turn call screening onTo turn call screening off Voice mail service Answering an intercom call IntercomTransferring calls Making an intercom call Answering a transferred call Handset Conference calls Base unit Press Handset Handset locator Character entry modes Characters available in each character entry modeCharacter entry Extended character table N Numeric entry table Arabic character tablePersian character table Error messages General use Problem Cause/solution Troubleshooting Battery recharge Problem Cause/solution Programmable settings Problem Cause/solution Making/answering calls, intercom Problem Cause/solution Caller ID Problem Cause/solution Liquid damage Problem Cause/solution Specifications Index Copyright PNQX1230ZA CC0808DG0For your future reference