Useful Information
Programmable settings
Problem | Cause/solution |
I have changed the display | L Change the display language (page 15). |
language to a language I |
|
cannot read. |
|
While programming, the | L A call is being received. Answer the call and |
handset starts to ring. | start again after hanging up. |
I cannot register a handset to a | L The maximum number of handsets (6) is |
base unit. | already registered to the base unit. Cancel |
| unused handset registrations from the base |
| unit (page 28). |
| L You entered the wrong PIN. If you forget your |
| PIN, contact your nearest Panasonic service |
| centre. |
| L Place the handset and the base unit away |
| from other electrical appliances. |
|
|
Battery recharge |
|
|
|
Problem | Cause/solution |
The handset beeps and/or 3 | L Battery charge is low. Fully charge the |
flashes. | batteries (page 13). |
I fully charged the batteries, but | L Clean the charge contacts and charge again |
3still flashes. | (page 13). |
| L It is time to replace the batteries (page 12). |
I fully charged the batteries, but | L Clean the battery ends (S, T) and the |
the operating time seems to be | charge contacts with a dry cloth, and charge |
shorter. | again. |
The handset display is blank. | L The handset is not turned on. Turn the power |
| on (page 15). |
46
