Avanti WC681BG-2 instruction manual Operating Your Wine Chiller

OPERATING YOUR WINE CHILLER

It is recommended you install the Wine Chiller in a place where the ambient temperature is between 72-78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 40-65 degrees Fahrenheit may not be reached.

Recommended Temperatures for Chilling Wines

Red Wines	58 – 65º F	14 – 18º C
Dry / White Wines	48 – 57º F	8 – 13º C
Rose Wines	49 – 51º F	9 – 10º C
Sparkling Wines	40 – 47º F	4 – 8º C

R

SPARKL WHITE RED

WINE CHILLER

UP DOWN SET

F

C

DISPLAY ON/OFF

F

C

ON/OFF Power

To turn the appliance ON or OFF, Press and hold the ON/OFF button for approximately 2 seconds..

Setting the Temperature Control

•You can set the temperature as you desire by pushing the UP or DOWN button. When you push the two buttons for the first time, the LED readout will show the original temperature set at previous time (the temperature preset at the factory is 54ºF) in the “display” window.

•The temperature that you desire to setwill increase 1ºF or 1ºC if you push the UP button once, on the contrary the temperature will decrease1ºFor 1ºC if youpush the DOWNbutton once.

•When you store mostly red wines, the temperature which you control by pushing the above two buttons need to be set at between 58 to 65° F and the LED lamp under “RED” will be lit red.

•When you store mostly white wines, the temperature needs to be set at between 48 to 57° F and the LED lamp under “WHITE” will be lit green.

•When you store mostly sparkling wines, the temperature needs to be set at between 40 to 47° F and the LED lamp under “SPARKL” will be lit amber.

•You can select temperature display setting from Fahrenheit to Celsius degree by pushing the UP and DOWN button at the same time for 5 seconds. Fahrenheit and Celsius degrees indicator will appear in green color in the “SET” window.

•The temperature inside the unit will appear in blue color in the “DISPLAY” window.

NOTE:

•If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the Wine Chiller will not start.

•When you use the wine chiller for the first time or restart the wine chiller after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the wine chiller is running for a few hours everything will be back to normal.

Storage

Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able to store may vary.

NOTE: You can place 166 standard bottles in this wine chiller with 11 bottles on each large shelf and 6 bottles on each small shelf.

10