Installation Instructions

WARNING

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

•Read all instructions before using the Wine Chiller.

•DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

•Before you throw away your old Wine Chiller: Take off the door. Leave the shelves in place so that children may not easily climb inside.

•Never allow children to operate, play with, or crawl inside the appliance.

•Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.

•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

-Save these instructions-

Before Using Your Wine Chiller

•Remove the exterior and interior packing. Read installer’s directions.

•Check to be sure you have all of the following parts:

•14 Large Wooden Shelves

•2 Small Wooden Shelves

•2 Keys

•1 Door Lower Hinge for Door Opening from the Right Side

•1 Instruction Manual

•Before connecting the Wine Chiller to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

•Clean the interior surface with lukewarm water using a soft cloth.

Installation of Your Wine Chiller

•This appliance is designed to be free standing or recessed with a minimum clearance of ¼ inch on each side and at the back.

•This appliance is not designed for built-in installation (zero clearances).

•Place your Wine Chiller on a floor that is strong enough to support it when it is fully loaded. To level your Wine Chiller, adjust the front leveling leg at the bottom of the Wine Chiller.

•Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

•Avoid locating the unit in moist areas.

•Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

WC681BG-2 specifications

The Avanti WC681BG-2 is a standout addition to any modern bathroom, seamlessly blending technology, style, and functionality. This innovative toilet offers a range of features that make it highly desirable for those looking to upgrade their home.

One of the most significant aspects of the Avanti WC681BG-2 is its dual-flush system. This technology allows users to choose between a full flush and a reduced flush, promoting water conservation without compromising performance. Such a feature not only supports environmentally friendly practices but also helps in reducing monthly water bills. The ease of use and efficiency of this dual-flush mechanism is one of the toilet's most praised characteristics.

Additionally, the Avanti WC681BG-2 is designed with a comfortable height. This feature, often referred to as "right height," makes sitting and standing easier for users of all ages, particularly seniors and those with mobility issues. The higher seat offers a more comfortable experience, enhancing the overall usability of the toilet.

Another impressive characteristic of the Avanti WC681BG-2 is its sleek, modern design. With clean lines and a sophisticated finish, it can easily integrate into any bathroom décor. The toilet’s compact size also makes it a great option for smaller bathrooms, as it maximizes space without sacrificing style.

The WC681BG-2 is constructed from high-quality vitreous china, providing durability and ease of cleaning. The smooth surface not only enhances the aesthetic appeal but also makes maintenance straightforward. Cleaning the toilet is simplified, reducing the time and effort required to keep it in top condition.

Furthermore, the Avanti WC681BG-2 features a powerful flushing mechanism that ensures effective waste removal with every flush. The high-efficiency flushing system minimizes clogs, promoting a hassle-free experience. This toilet is designed for long-term reliability and service, making it a sound investment for any household.

Overall, the Avanti WC681BG-2 combines modern technology, comfort, and aesthetic appeal to create an exceptional toilet solution. Its water-saving dual-flush system, comfortable height, and durable construction make it a highly recommended choice for those overhauling their bathrooms. With the WC681BG-2, homeowners can enjoy comfort and style while being eco-conscious.