REVERSING THE DOORS
We recommend that you reverse doors before switching on for the first time.
Tools required: Small and medium size flat and
Spare Parts supplied in the plastic bag: The following parts, which are exclusively for left hand side fitted hinge operation are supplied in a plastic bag with the appliance:
-Upper door top trim hinge covers – there are 2 different parts, one for each side of top trim.
-Upper door middle hinge bushing/ door stopper assembly.
We suggest you keep all the parts supplied in the plastic bag and also parts, which have been removed when reversing doors, in a safe place for possible future,
IMPORTANT: We suggest you ask somebody to help you when moving the appliance around and to hold doors when removing /
Please refer to diagrams supplied. To follow numbers in brackets below, refer to the main diagram.
1.Switch off the appliance at the socket outlet and pull out the mains plug.
2.Remove all loose items and fittings and food, if any, from inside the appliance and door racks.
3.Gently prise off plastic hinge covers on both sides of upper door top trim and front top panel using a small flat- headed screwdriver. (1)
4.Gently tilt the appliance back against a strong wall on its rear side sufficiently to allow the lower hinge to be removed. Take care to protect the appliance, your wall and floor coverings. You can utilise the original packaging to do this. Once you tilt the appliance back, check to make sure the appliance is completely stable and safe before you carry on. (2)
5.Unscrew and remove the lower hinge using a
6.Remove lower door carefully off the middle hinge and stand door upright in a safe place. (4)
7.Open upper door and unscrew and remove the middle hinge while holding the upper door firmly. Use a flat- headed screwdriver. Middle hinge will need to be rotated 180 degrees before
8.Remove upper door carefully off the upper hinge and stand door upright in a safe place.(6)
9.Unscrew and remove the upper hinge using a
(7)
10
EN