Beko CDA671F Electrical Requirements, IMPORTANT! Fitting a Different Plug

Page 3

ELECTRICAL REQUIREMENTS

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply.

Rating label is on the left hand side of fridge inner liner.

We recommend that this appliance is connected to the mains supply via a suitable switched and fused socket in a readily accessible position.

Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO Authorised Service Agent.

WARNING! THIS APPLIANCE MUST BE EARTHED

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTA approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

IMPORTANT! FITTING A DIFFERENT PLUG

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

(See diagram).

1.Connect the green-yellow or green (Earth) wire to the terminal in the plug marked 'E' or with

the symbol or coloured

green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked 'N' or coloured black.

3.Connect the brown (Live) wire to the terminal in the plug marked 'L' or coloured red.

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box.

If in doubt contact a qualified electrician.

3

Image 3
Contents Performance Contents IMPORTANT! Fitting a Different Plug Electrical RequirementsTransportation Instructions Installation InstructionsPage Getting to Know Your Combi Frost Free Beko Fridge / Freezer Reversing the Doors Suggested Arrangement of Food in the FRIDGE/FREEZER Temperature Adjustment Before OperatingStoring Frozen Food Freezing Fresh Food Making ICE CubesDefrosting Replacing the Interior Light Bulb See diagram Cleaning and Care DO’S and DON’TS Energy Saving Tips Problem SolvingWhat is covered? Guarantee DetailsHOW to Obtain Service

CDA671F specifications

The Beko CDA671F is a standout model in the realm of freestanding fridge-freezers, designed to meet the diverse needs of modern households while ensuring energy efficiency and reliability. This appliance boasts a sleek stainless steel finish, enhancing the aesthetic of any kitchen space while providing a durable exterior.

One of the key features of the Beko CDA671F is its combined refrigerator and freezer capacity of 300 liters, with 202 liters dedicated to the refrigerator and 98 liters to the freezer. This generous space allows users to store a wide variety of food items, from fresh produce and dairy to frozen meals and ice. The appliance is also designed with adjustable shelves, offering flexibility in organization to accommodate taller items.

In terms of energy efficiency, the Beko CDA671F holds a commendable A+ rating, indicating it consumes less energy than many traditional models. This attribute not only helps reduce household energy bills but also supports environmentally conscious living, making it an appealing choice for eco-friendly consumers.

Equipped with innovative technologies, this fridge-freezer features Beko’s HarvestFresh technology, which utilizes a unique three-color light system to preserve the vitamins in fruits and vegetables for a longer duration. The appliance also includes a frost-free freezer, which eliminates the need for manual defrosting and ensures consistent freezing performance, saving time and effort for users.

The Beko CDA671F prioritizes user convenience with its internal LED lighting, which provides clear visibility of the contents without generating excess heat. Additionally, the reversible doors allow for flexible installation options, accommodating various kitchen layouts. The appliance is designed with a quiet operation, ensuring that it functions seamlessly without causing disturbances in the home.

Safety features are another highlight, with a child lock option ensuring peace of mind for families with young children. The appliance also includes a cool blue LED display, making it easy to monitor settings and temperatures at a glance.

Overall, the Beko CDA671F impresses with its combination of spacious storage, advanced technology, and efficient energy use, making it an excellent addition to any kitchen.