Transportation Instructions

1.The appliance should be transported only in an upright position. The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance has to be transported horizontally, it must only be laid on its left hand side when standing in the front of the appliance. After bringing it to upright position,it must not be operated for at least 4 hours to allow the system to settle.

3.Failure to comply with the above instructions could result in damage to the appliance, for which the manufacturer will not be held liable.

4.The appliance must be protected against rain, moisture and other atmospheric influences.

5.When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the door or handle.

6.Empty any water in the drain tray before moving. See section „Defrosting” and „Care & cleaning” for further information.

7.Make sure that the defrost water pipe at the back of the product is fixed to the plastic evaporating pan on the top of the compressor, to avoid defrost water spillage on the floor.

Important!

•Care must be taken while cleaning/carrying the appliance not to touch the bottom of the condenser metal wires at the back of the appliance, as this could cause injury to fingers and hands.

•Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

•Make sure that the mains cable is not caught under the appliance during and after moving, as this could damage the cable.

•Do not allow children to play with the appliance or tamper with the controls. BEKO plc declines to accept any liability should the instructions not be followed.

INSTALLATION INSTRUCTIONS

1.The space in the room where the appliance is installed must not be smaller than 10 cubic metres.

2.Do not put your fridge freezer in a cold room where the temperature is likely to go below +5 degrees C (41 degrees F) during night time and/or especially in winter.

This fridge freezer has been designed to operate in ambient temperatures between +10 and +32 degrees C (50 and 90 degrees F) Therefore if the appliance is installed in an unheated/cold room (eg: conservatory/annex/

shed/garage etc) then the appliance will not operate causing the freezer compartment to run warmer and as a result the storage time of frozen food may be reduced.

3.Do not place the appliance near cookers, radiators or in direct sunlight as this will cause your appliance to work harder. If installed next to a source of heat or freezer, maintain the following minimum side clearances:

From Cookers	2" (50 mm)
From Radiators	12" (300 mm)
From Refrigerators or Larder Fridge	1" (25 mm)

CDA671F specifications

The Beko CDA671F is a standout model in the realm of freestanding fridge-freezers, designed to meet the diverse needs of modern households while ensuring energy efficiency and reliability. This appliance boasts a sleek stainless steel finish, enhancing the aesthetic of any kitchen space while providing a durable exterior.

One of the key features of the Beko CDA671F is its combined refrigerator and freezer capacity of 300 liters, with 202 liters dedicated to the refrigerator and 98 liters to the freezer. This generous space allows users to store a wide variety of food items, from fresh produce and dairy to frozen meals and ice. The appliance is also designed with adjustable shelves, offering flexibility in organization to accommodate taller items.

In terms of energy efficiency, the Beko CDA671F holds a commendable A+ rating, indicating it consumes less energy than many traditional models. This attribute not only helps reduce household energy bills but also supports environmentally conscious living, making it an appealing choice for eco-friendly consumers.

Equipped with innovative technologies, this fridge-freezer features Beko’s HarvestFresh technology, which utilizes a unique three-color light system to preserve the vitamins in fruits and vegetables for a longer duration. The appliance also includes a frost-free freezer, which eliminates the need for manual defrosting and ensures consistent freezing performance, saving time and effort for users.

The Beko CDA671F prioritizes user convenience with its internal LED lighting, which provides clear visibility of the contents without generating excess heat. Additionally, the reversible doors allow for flexible installation options, accommodating various kitchen layouts. The appliance is designed with a quiet operation, ensuring that it functions seamlessly without causing disturbances in the home.

Safety features are another highlight, with a child lock option ensuring peace of mind for families with young children. The appliance also includes a cool blue LED display, making it easy to monitor settings and temperatures at a glance.

Overall, the Beko CDA671F impresses with its combination of spacious storage, advanced technology, and efficient energy use, making it an excellent addition to any kitchen.