Configure the network settings
Install the software
Before installing the software, read the readme file on the provided
Software included on the provided CD-ROM
•Panasonic IP setting software
Configure the network settings of the camera. Refer to the following for further information.
•Viewer software "Network Camera View3"
It is necessary to install the viewer software "Network Camera View3" to display images on a PC.
Configure the network settings of the camera using the Panasonic IP setting software
It is possible to configure the network settings of the camera using the IP setting software on the provided
When using multiple cameras, it is necessary to configure the network settings of each camera independently.
If the Panasonic IP setting software does not work, configure the network settings of the cam- era and the PC individually on the "Network" page of the setup menu. Refer to the setup instructions (PDF) for further information.
Important:
•When using Windows® XP SP2, the "Windows Security Alert" window may be displayed when starting the IP setting software.
In this case, click the "Unblock" button on the displayed "Windows Security Alert" window.
•If Windows Vista® is used, the password of the administrator account may be required after startup of the Panasonic IP setting software. In such a case, disable "User Account Control" from Control Panel.
•For the security enhancement, the MAC address/IP address of the camera to be config- ured will not be displayed when around 20 minutes have passed after turning on the power of the camera.
•The Panasonic IP setting software is inoperable from other subnets via the same router.
•It is impossible to display and configure this camera when using an old version (ver. 2.xx) of the Panasonic IP setting software.
29
