Note:
•If the angular field changed during adjustment, press the focus assist button to exit from the "FOCUS ADJUSTMENT" screen once (because change in the angular field causes change in the values of "PEAK HOLD" and "INDICATOR"). After adjustment of angular field, conduct the procedure from step 3.
Important:
•If a subject is applicable to the following, press the focus assist button again to exit from the "FOCUS ADJUSTMENT" screen or obtain an optimal focal point while viewing the image.
•Frequently moving subject
•Subject with remarkable illuminance change
•Subject with low illuminance
•Too bright or reflective subject
•Subject through a window
•Place where the lens easily becomes dirty
•Subject with less contrast such as white wall
•Subject with remarkable depth
•Subject with heavy flicker
•Subject with horizontally parallel lines such as a shutter
19
