zStart the Panasonic IP setting software.
x Click the [IP setting] button after selecting the MAC address/IP address of the camera to be configured.
Note:
•When using a DHCP server, the IP address assigned to the camera can be displayed by clicking the [Refresh] button of the IP setting software.
cComplete each network setup item and click the [Apply] button.
Note:
•When using a DHCP server, it is possible to set "DNS" to "Auto".
Important:
•It may take around 30 seconds to completely upload the settings of the camera after click- ing the [Apply] button. The settings may be invalidated when the power supply from the AC adapter is cut or when the LAN cable is disconnected before completing the upload. In this case, perform the settings again.
•When using a firewall (including software), allow access to all UDP ports.
30
