Panasonic WV-NP304 Lens mounting, Optional lens, How to use a varifocal lens, Lens type, Model no

Lens mounting

Mount the lens by rotating it clockwise slowly. Then, connect the lens cable to the ALC lens connector of the camera.

Flange-back adjustment ring

Zoom lock screw

Within ø20 mm

T

W

ALC lens connector

CS-mount: Less than 8 mm

Focus ring

Optional lens

Lens type	Model no.
ALC lens for 1/3-inch type CCD cameras	WV-LZA62/2
2x varifocal (high resolution)

Other lenses for 1/3 inch CCD cameras can be mounted on this camera. However, high resolu- tion scanning of this camera may not be fully used for scanning of "1 280 x 960".It is recom- mended to use a dedicated high-resolution lens when shooting a dark subject with the aperture opened.

How to use a varifocal lens

The following are descriptions of how to adjust a 2x varifocal lens. Method of adjustment may be different depending on the lens in use. Refer to the operating instructions of the lens in use for further information.

1.Loosen the zoom lock screw and rotate to the "T" end.

2.Set the focus ring to near the "F" end.

3.Focus on a subject which is located around 10 m away or further to adjust the flange-back length using flange- back adjustment ring.

TN

w

Wq

F

Zoom lock screw

Focus ring

Important:

•Check if it is possible to focus on a subject which is located around 1.2 m away by rotating the focus ring while setting the zoom lock screw to the "W" end.

16