When moving your refrigerator

To prevent fl oor damage, be sure the front leveling legs are in the up position (above the fl oor).

Refer to “HOW TO LEVEL THE REFRIGERATOR” in the manual on page 21.

FLOORING

For proper installation, you must place this refrigerator on a level, hard surface that is the same height as the rest of the fl oor.

This surface should be strong enough to support a fully loaded refrigerator.

To protect the fi nish of the fl ooring, cut a large section of the cardboard carton and place it under the refrigerator where you are working.

When moving the refrigerator, you need to pull and push it straight forwards or back.

Do not wiggle it from side to side.

REMOVING THE REFRIGERATOR DOORS

If the refrigerator is too large to pass through your doorways easily, you can remove the refrigerator doors.

If you need to remove the doors continue below.

If you do not need to remove the refrigerator doors, go to “Leveling the Refrigerator” on page 21.

Tools you will need (Not provided)

SETTING

UP

 

 

 

Philips screwdriver

Flat-blade

Socket wrench

 

(+)

screwdriver (-)

10 mm

 

Pliers

Allen wrench

Allen wrench

 

4 mm

5 mm

 

 

 

• Disconnect power to the refrigerator WARNING before removing the doors or drawers.

• Be careful not to drop, damage or scratch the doors/drawers while removing them.

• Use care when you remove the doors/drawers. The doors are heavy and you could injure yourself.

• Re-attach the doors/drawers properly to avoid: - Moisture from air leakage.

- Uneven door alignment.

- Wasting energy due to improper door seal.

English - 17

DA68-03013E-03.indb 17

2015. 8. 26. ￿￿ 10:38