-This provides the best performance and also prevents overloading house wiring circuits, which could cause a fi re hazard from overheated wires.
If the wall socket is loose, do not insert the power plug.
-There is a risk of electric shock or fi re.
•Do not use a cord that shows cracks or abrasion damage along its length or at either end.
•Do not bend the power cord excessively or place heavy articles on it.
•Do not use aerosols near the refrigerator.
-Aerosols used near the refrigerator may cause an explosion or fi re.
•Do not install this appliance in a location where gas may leak.
-This may result in an electric shock or fi re.
• The installation or any service of this appliance is recommended by a qualifi ed technician or service company.
- Failing to do so may result
in an electric shock, fi re, explosion, problems with the product, or injury.
•This refrigerator must be properly installed and located in accordance with the manual before it is used.
•Do not install the refrigerator in a damp place or place where it may come in contact with water.
-Deteriorated insulation of electrical parts may cause an electric shock or fi re.
•Connect the power plug in the proper position with the cord hanging down.
-If you connect the power plug upside down, the wire can get cut off and cause fi re or an electric shock.
•Do not use a cord that shows cracks or abrasion damage along its length or at either end.
•Make sure that the power plug is not squashed or damaged by the back of the refrigerator.
•When moving the refrigerator, be careful not to roll over or damage the power cord.
- This constitutes a fi re hazard.
English - 6
2015. 8. 26. 10:38 |
