Connecting to the water supply line | Connecting the water supply line to the |
| refrigerator. |
1.First, shut off the main water supply.
There are several items that you need to purchase to complete this connection.
You may fi nd these items sold as a kit at your local hardware store.
2.Locate the nearest cold water drinking line and install the pipe clamp and shut off valve.
Cold water line 
Pipe clamp 
Shut off valve 
3.Connect the water line installation kit to the shut off valve.
Cold water line | Water line installation |
| kit |
Pipe clamp |
|
Shut off valve |
|
For Copper Tubing | For Plastic Tubing | ||
• | ¼” copper tubing | • | ¼” plastic tubing |
• ¼” compression nut (1pc) |
| → Molded end (Bulb) | |
• | Ferrule (2pc) | • | ¼” compression nut (1pc) |
|
|
|
|
Refrigerator | ||
| Plastic Tubing | |
Compression | (Assembled) | |
| ||
Nut (1/4”) | Compression | |
(Assembled) | Fitting | |
| (Assembled) | |
Ferrule | Molded end | |
(Bulb) | ||
(Not | ||
| ||
supplied) | Compression | |
| nut (B) (1/4”) | |
| (Not supplied) | |
Copper tubing or | Plastic tubing (B) | |
(Not supplied) | (Not supplied) | |
Household water supply line
1.Connect the household water line to the assembled compression fi tting.
-If you are using copper tubing, slip the compression nut (B) (not supplied) and ferrule (not supplied) on the copper tubing (not supplied) as shown.
-If you are using plastic tubing (B), insert the molded end (Bulb) of the plastic tubing (B) into the compression fi tting.
• Do not use without the molded end (Bulb) CAUTION of the plastic tubing (B).
English - 24
2015. 8. 26. 10:38 |
