Cleaning the water tank Remove the water tank, open the latches on both sides and detach the top cover mechanism from the water tank. Clean the water tank with warm clean water, reinstall the top cover mechanism and fasten the latches.
When installing the water tank, make sure that hooks behind it fits securely into the hangers on the door. Make sure that parts removed during cleaning (if any) are installed correctly into their original locations. Otherwise, water may leak.
Important:
Water tank and components of water dispenser are not
Water tray
Water that drips while using the water dispenser accumulates in the drip tray housing.Remove the drip tray firstly pressing up from the front edge then pulling towards yourself.Then clean drip housing by a fabric or sponge that has water absorbtion tendency.
Safety lock for Water Dispenser You may use the lock in order to avoid small children tampering with the water dispenser. To do this, slide the locking latch from left to right as illustrated in the figure. You must slide the latch back to left position in order to use the
.water dispenser
To avoid accidental water dispensing, we recommend you to lock the water
.dispenser
UNLOCK | LOCK |
Maximum height of glass suitable for use with Stored Water Dispenser is 16 cm which includes most of the “Standard” pint glasses.
20
EN