Transportation Instructions

1.The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance has to be transported horizontally, it must only be laid on its right hand side when standing in the front of the appliance. After bringing it to upright position, it must not be operated for at least 4 hours to allow the system to settle.

3.Failure to comply with the

above instructions could result in damage occuring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.

4.The appliance must be protected against rain, moisture and other atmospheric influences.

5.When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the door or handle.

6.Empty any water in the drain

tray before moving. See section ‘Defrosting’ and ‘Maintenance & Care’ for further information.

7.Make sure that the defrost water pipe at the back of the product is fixed to the plastic evaporating pan on the top of the compressor, to avoid defrost water spillage on the floor.

IMPORTANT : Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the appliance as you might injure your fingers and hands.

Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

IMPORTANT: Make sure that mains cable is not caught under the appliance during and after carrying

/moving the appliance, to avoid the mains cable becoming cut or damaged.”

Do not allow children to play with the appliance or tamper with the controls.

BEKO declines to accept any liability should the instructions not be followed.

Installation Instructions

1.The space in the room where the appliance is installed must not be smaller than 10 cubic metres.

2.This appliance has been designed to operate in ambient temperatures up to 32 degrees C (90 degrees F) and is equipped with an Advanced Electronic Temperature Control System called Total Fridge Freezer Guard which ensures that at the frozen food in the freezer will not defrost and the fresh food in the fridge will not freeze even if the ambient temperature falls as low as -15 °C. So you may then install your appliance in a garage or an unheated room without having to worry about frozen food in the freezer or fresh food in the fridge being spoilt. At low ambient temperatures, fridge contents are also stored safely.

CXFD 6113 S, CFD 6913 APX, CXFD 6113 W specifications

The Beko CXFD 6113 W, CFD 6913 APX, and CXFD 6113 S are notable refrigerator models that showcase contemporary design and advanced features, catering to modern households' needs for efficiency and convenience. These appliances integrate cutting-edge technologies aimed at enhancing food preservation while maintaining energy efficiency.

The Beko CXFD 6113 W is characterized by its sleek white finish and spacious interior. This model features a total net capacity of approximately 335 liters, providing ample storage space for food and beverages. One of its standout features is the NeoFrost dual cooling system, which uses two separate cooling systems. This technology helps maintain optimal humidity levels in the fridge while preventing the mixing of odors between the refrigerator and freezer compartments. Additionally, the CXFD 6113 W incorporates a HarvestFresh technology that utilizes natural light to preserve the vitamins in fresh fruits and vegetables, ensuring that they stay nutritious for a longer period.

The Beko CFD 6913 APX, on the other hand, boasts a stylish stainless steel exterior and a modern design. This model also offers a generous total net capacity, ensuring that users have sufficient space for all their groceries. One of the key features of the CFD 6913 APX is its ProSmart Inverter Compressor, which not only enhances energy efficiency but also ensures quieter operation. This compressor automatically adjusts cooling levels based on the temperature inside the fridge, contributing to a more consistent and stable environment for food preservation.

The CXFD 6113 S model further enhances the Beko lineup with its striking silver finish. This model shares many of the same features as its counterparts but also introduces additional smart functionalities. One significant feature is the internal LED lighting, which provides improved visibility, allowing users to easily locate their food items. Moreover, with its No Frost technology, the CXFD 6113 S eliminates the need for manual defrosting, providing convenience and reducing maintenance efforts.

In summary, the Beko CXFD 6113 W, CFD 6913 APX, and CXFD 6113 S are impressive models that combine style with functionality. With advanced cooling technologies, ample storage space, and energy-efficient designs, these refrigerators are ideal for anyone seeking dependable and stylish kitchen appliances. Each model brings unique characteristics to the table, ensuring that there is a suitable option for diverse consumer preferences.