Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown on the rating plate inside the appliance corresponds to yourelectricity supply.

Rating label is on the left hand side of fridge inner liner.

We recommend that this appliance be connected to the mains supply via a

Suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.

Should the mains lead of the appliance become damaged or should it need

Replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO authorised service agent.

Warning! This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Important! Fitting A Different Plug As the colours of the wires in the

mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: (See diagram).

1.Connect the green-yellow or green (Earth) wire to the terminal in the plug

marked ‘E’ or with the symbol or coloured green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3.Connect the brown (Live) wire to the terminal in the plug marked ‘L’ or coloured red.

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the

GREEN &
YELLOW
OR
GREEN	32mm.
	32mm.

BLUE
OR	6mm.
BLACK	6mm.

6mm.

BROWN	.
OR	6mm
RED
22mm.

12mm.

FUSE

FITTED WITH BS 1362 13A FUSE ALWAYS FIT BS 1362 REPLACEMENT CARTRIDGE FUSE

event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted.

CORD GRIP

CXFD 6113 S, CFD 6913 APX, CXFD 6113 W specifications

The Beko CXFD 6113 W, CFD 6913 APX, and CXFD 6113 S are notable refrigerator models that showcase contemporary design and advanced features, catering to modern households' needs for efficiency and convenience. These appliances integrate cutting-edge technologies aimed at enhancing food preservation while maintaining energy efficiency.

The Beko CXFD 6113 W is characterized by its sleek white finish and spacious interior. This model features a total net capacity of approximately 335 liters, providing ample storage space for food and beverages. One of its standout features is the NeoFrost dual cooling system, which uses two separate cooling systems. This technology helps maintain optimal humidity levels in the fridge while preventing the mixing of odors between the refrigerator and freezer compartments. Additionally, the CXFD 6113 W incorporates a HarvestFresh technology that utilizes natural light to preserve the vitamins in fresh fruits and vegetables, ensuring that they stay nutritious for a longer period.

The Beko CFD 6913 APX, on the other hand, boasts a stylish stainless steel exterior and a modern design. This model also offers a generous total net capacity, ensuring that users have sufficient space for all their groceries. One of the key features of the CFD 6913 APX is its ProSmart Inverter Compressor, which not only enhances energy efficiency but also ensures quieter operation. This compressor automatically adjusts cooling levels based on the temperature inside the fridge, contributing to a more consistent and stable environment for food preservation.

The CXFD 6113 S model further enhances the Beko lineup with its striking silver finish. This model shares many of the same features as its counterparts but also introduces additional smart functionalities. One significant feature is the internal LED lighting, which provides improved visibility, allowing users to easily locate their food items. Moreover, with its No Frost technology, the CXFD 6113 S eliminates the need for manual defrosting, providing convenience and reducing maintenance efforts.

In summary, the Beko CXFD 6113 W, CFD 6913 APX, and CXFD 6113 S are impressive models that combine style with functionality. With advanced cooling technologies, ample storage space, and energy-efficient designs, these refrigerators are ideal for anyone seeking dependable and stylish kitchen appliances. Each model brings unique characteristics to the table, ensuring that there is a suitable option for diverse consumer preferences.