Beko TZDA 504 F manual Electronic card

Page 6

IMPORTANT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INSTALLATION INSTRUCTIONS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.

The space in the room where the appliance is installed must not be smaller

 

 

than 10 cubic metres.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

If possible avoid placing the appliance near cookers, radiators or in direct

 

 

sunlight as this will cause the compressor to run for long periods. If installed

 

 

next to a source of heat or refrigerator, maintain the following minimum side

 

 

clearances:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

From Cookers

2"

 

(50 mm)

 

 

 

 

 

 

 

 

 

 

From Radiators

12" (300 mm)

 

 

 

 

 

 

 

 

 

 

From Refrigerators or Larder Fridge

1"

 

(25 mm)

 

 

 

 

 

 

 

 

3.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Make sure that sufficient room is provided around the appliance to ensure free

 

 

air circulation. Allow a minimum of 60 mm (2.4 inches) between the top of the

 

fridge and the ceiling or the underside of a wall cupboard.

4.

Fit the two plastic wall spacers supplied with the appliance rotating 1/4 turn

 

to the condenser at the back of the appliance (See diagram).

5.

The appliance should be located on a smooth surface.

 

 

 

 

 

 

Electronic card

 

 

(covered by plastic cover)

 

The two front feet can be adjusted as required.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To ensure that,your appliance is standing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

upright adjust the two front feet by turning

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

clockwise or anti-clockwise, until the product

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is in firm contact with the floor. Correct

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

adjustment of feet avoids excessive

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.

 

vibration and noise.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Refer to "Cleaning and Care" section to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

prepare your appliance for use.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7.A special receptacle is supplied to store the mains plug during transit.

The receptacle is fixed at the back of the cabinet, on the right hand side of the compressor. (See diagram) Gently remove the plug from the receptacle. Never pull the mains cord, you may damage the appliance. In the case of transportation, ensure you locate the plug in the receptacle provided to avoid transit damage.

5

Image 6
Contents Cu.ft. Frost Free Tall Freezer Tzda 504 F Performance Page Electrical Requirements Transportation Instructions Electronic card Starting Temperature Control and Adjustment Freezing Fresh Food Reservoir Cleaning and Care DOS and Donts Reversing the Door 180 Guarantee Details Equipment Weee
Related manuals
Manual 16 pages 5.74 Kb

TZDA 504 F specifications

The Beko TZDA 504 F is a standout model in the world of freestanding upright freezers, designed to meet the needs of modern households. With its user-friendly features and efficient technology, this freezer is an excellent choice for those seeking reliable and ample storage for frozen goods.

One of the key characteristics of the Beko TZDA 504 F is its impressive capacity. Offering a substantial amount of storage space, it can accommodate a variety of items, from frozen meals to bulk purchases, making it ideal for families or anyone looking to store larger quantities of food. The design includes multiple drawers and shelves, allowing for easy organization and access to your frozen items.

Energy efficiency is another significant feature of the Beko TZDA 504 F. It boasts an impressive Energy Efficiency Class rating, helping users save on their electricity bills while minimizing their environmental footprint. The appliance's advanced insulation technology ensures that the cold air stays inside, maintaining optimal freezing conditions and reducing energy consumption.

Beko has also integrated innovative cooling technologies into the TZDA 504 F, such as Frost Free technology. This ensures that the freezer remains free of frost buildup, eliminating the need for manual defrosting. This feature not only saves time but also expands the usable space inside the freezer by preventing ice buildup.

Additionally, the Beko TZDA 504 F is designed with user convenience in mind. Its adjustable temperature control allows users to customize the freezing conditions according to the types of food being stored. The external handle design provides easy access, ensuring a smooth user experience.

Safety and durability are also paramount in the Beko TZDA 504 F. It comes with a robust build designed to withstand daily use, and the reversible door feature adds flexibility for placement within your home. The appliance operates quietly, making it suitable for open-concept living spaces.

Overall, the Beko TZDA 504 F combines efficiency, convenience, and reliability, making it a valuable addition to any kitchen. With its ample storage capacity, energy-saving features, and innovative technologies, this upright freezer is perfectly equipped to cater to the needs of modern families and individuals alike, ensuring that frozen food remains safe and easily accessible.