Beko TZDA 568 FS, TZDA 568 FW manual Electrical Requirements

Page 4

ELECTRICAL REQUIREMENTS

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply. Rating label is on the left hand side of the freezer liner. We recommend that this appliance is connected to the mains supply via a suitable switched and fused socket. The socket must be in an accessible position. Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO Authorised Service Agent.

WARNING! THIS APPLIANCE MUST BE EARTHED

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers can be obtained from a BEKO authorised service agent.

IMPORTANT! FITTING A DIFFERENT PLUG

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

(See diagram).

1.Connect the green-yellow or green (Earth) wire to the terminal in the plug marked 'E' or with

the symbol or coloured green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked 'N' or coloured black.

3.Connect the brown (Live) wire to the terminal in the plug marked 'L' or coloured red.

GREEN &

 

 

 

 

6mm.

YELLOW

 

 

OR

 

GREEN

32mm.

 

L

 

 

 

BROWN

6mm.

 

 

 

N

 

 

OR

 

 

22mm.

RED

 

BLUE

 

 

 

6mm.

 

 

12mm.

OR

 

 

 

 

 

 

BLACK

 

 

 

 

CORD GRIP

FUSE

FITTED WITH BS 1362 13A FUSE ALWAYS FIT BS 1362 REPLACEMENT CARTRIDGE FUSE

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box.

If in doubt contact a qualified electrician.

3

Image 4
Contents Tzda 568 FW Tzda 568 FS Performance Page Electrical Requirements Transportation Instructions Page Electronic card Starting Temperature Control and Adjustment Freezing Fresh Food Reservoir Cleaning and Care DOS and Donts Reversing the Door 180 Guarantee Details Equipment Weee

TZDA 568 FW, TZDA 568 FS specifications

The Beko TZDA 568 FS and TZDA 568 FW are modern upright freezers designed to meet the storage needs of contemporary households while incorporating advanced technology and energy efficiency. These models stand out not only for their sleek design but also for their impressive functionalities that cater to the demands of everyday life.

One of the standout features of the Beko TZDA 568 FS and TZDA 568 FW is their spacious capacity, providing ample storage space for both small and large families. With a net capacity of 168 liters, these freezers allow for easy organization of frozen goods, making it simple to store everything from bulk purchases to meal prepped items. The unit features several adjustable shelves and compartments, enabling users to customize their storage arrangement according to their unique preferences.

In terms of technology, both models are equipped with the innovative NeoFrost Dual Cooling system. This technology ensures that the freezer maintains optimal humidity levels, preventing freezer burn and preserving the quality of all stored items. The dual cooling system works by providing separate cooling for the freezer and refrigerator compartments, ensuring that foods retain their natural flavor and freshness for longer periods.

Energy efficiency is a critical aspect of modern appliances, and the Beko TZDA 568 FS and TZDA 568 FW excel in this area. With an A+ energy rating, these models consume minimal energy while still delivering powerful performance. This translates to lower electricity bills and a reduced carbon footprint, making it an environmentally friendly choice for consumers.

Additional features include a fast freeze function that rapidly lowers the temperature of the freezer to preserve the quality of freshly stored items. This is especially useful for bulk freezing or when adding newly purchased goods to the freezer. Furthermore, both models possess a noise level of just 40 dB, ensuring quiet operation that does not disrupt home life.

In conclusion, the Beko TZDA 568 FS and TZDA 568 FW are reliable and efficient upright freezers that blend functionality with modern technology. Their spacious interiors, advanced cooling systems, energy efficiency, and user-friendly features make them an ideal choice for anyone in need of dependable frozen food storage. Consumer satisfaction is bolstered by Beko's commitment to quality and innovation, ensuring that these models are built to last.