Installation Instructions

IMPORTANT

1. The space in the room where the appliance is installed must not be smaller than 10 cubic metres.

2. If possible avoid placing the appliance near cookers, radiators or in direct

GETTING TO KNOW YOUR LARDER FRIDGE

sunlight as this will cause the compressor to run for long periods. If installed next to a source of heat or refrigerator, maintain the following minimum side clearances:

From Cookers	2"	(50 mm)
From Radiators	12" (300 mm)
From Refrigerators or Freezers	1"	(25 mm)

Allow a minimum of 60 mm (2.4 inches) between the top of the fridge and the ceiling or the underside of a wall cupboard.

3. Make sure that sufficient room is provided around the appliance to ensure free air circulation.

4. Fit the two plastic wall spacers supplied

with the appliance rotating 1/4 turn to the condenser at the back of the

refrigerator (see diagram). 5. The appliance should be located on a

smooth surface. The two front feet can be adjusted as required. To ensure that

your appliance is standing upright adjust

the two front feet by turning clockwise or anti-clockwise, until the product is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise.

6.Refer to "Cleaning and Care" section to prepare your appliance for use.

7.This appliance has been designed to operate in ambient temperatures beetween +10 and +32 degrees C (50 and 90 degrees F).Therefore if the appliance is installed in an unheated / cold room (E.g.: Conservatory / annex / shed / garage etc.) then the food in the larder fridge [In particular salad, fruit, water and fruit juices] will start freezing because of the cold ambient temperature when the temperature drops below 0 C [Zero degrees Centigrade]. The appliance will resume normal operation when the ambient temperature rises back above +5 C. Please note, between 0 C and +5 C, the compressor will not run but the temperature in the larder fridge will be safe to store your food anyway. So don't worry when the compressor does not operate between 0 C and +5 C.

8.A special receptacle is supplied to store the mains plug during transit. The receptacle is fixed at the back of the

cabinet, on the right hand side of the compressor. (See diagram) Gently remove the plug from the receptacle. Never pull the mains cord, you may damage the appliance. In the case of transportation, ensure you locate the plug in the receptacle provided to avoid transit damage.

Arrangement Examples (See diagram).

1.Interior light

2.Thermostat knob

3.Movable shelves

4.Defrost water collection channel - Drain tube

5.Crisper cover

6.Chiller drawer with humidity control

7.Crisper

8.Adjustable front feet

9.Adjustable door shelves

10.Egg compartment

11.Bottle shelf

TLDA 567 specifications

The Beko TLDA 567 is a highly efficient and stylish appliance that combines functionality with modern design to enhance any kitchen space. This 60 cm wide slimline dishwasher stands out due to its excellent features, innovative technologies, and user-friendly characteristics.

One of the standout features of the Beko TLDA 567 is its A+++ energy rating, which ensures maximum efficiency, reducing energy consumption and contributing to cost savings. With a capacity to accommodate up to 15 place settings, it is perfect for both small households and larger families. This model has six different wash programs, including intensity options tailored for various levels of soiling, meaning it can handle everything from lightly soiled dishes to heavily caked pots and pans.

The "Quick & Clean" function is another remarkable characteristic, allowing users to wash a full load in just 30 minutes. This is ideal for those who are always on the go and need their dishes cleaned in a hurry. Additionally, the "Half Load" option lets users run the dishwasher when it’s only partially full, saving both time and water.

The TLDA 567 is equipped with Beko's corner wash feature, which ensures that every corner of the dishwasher receives thorough cleaning, optimizing water spray patterns to reach every dish effectively. The interior of the dishwasher is designed with adjustable racks and folding tines, enabling customizable space for bulky items, which enhances usability.

Moreover, this dishwasher incorporates an advanced AquaIntense technology, providing extra water pressure for the lower basket to tackle stubborn dirt on pots and pans. This feature guarantees a deeper clean, ensuring that every dish sparkles pristine after each wash.

Another modern attribute of the Beko TLDA 567 is its quiet operation, with a noise level of only 48 dB, making it one of the quieter models on the market. This is particularly ideal for open-plan living spaces where noise can be a concern.

With its sleek design, efficient washing capabilities, and innovative features, the Beko TLDA 567 proves to be a reliable and stylish choice for any kitchen, combining practicality with performance. As a result, it is more than just a dishwasher; it is an essential appliance that significantly simplifies the dishwashing experience while aligning with energy-saving practices.