Beko CS 6914 APW manual Replacing the Interior Light Bulb

Page 12

REPLACING THE INTERIOR LIGHT BULB

Should the light fail to work, proceed as follows.

1.Switch off at the socket outlet and pull out the mains plug.

• You may find it useful to remove shelves for easy access.

2.Use a flat tipped screwdriver to remove the light diffuser cover by inserting the blade in each of the two recesses to prise off each side.

3.First check that the bulb hasn’t worked loose by ensuring it is screwed securely in the holder. Replace the plug and switch on. If the bulb works, replace the light cover by inserting the rear lug and pushing up to locate the front two lugs.

4.If the light still fails to work, switch off at the socket outlet and pull out the mains plug. Replace the bulb with a new 15 watt (max) screw cap (SES) bulb.

5.Carefully dispose of the burnt-out light bulb immediately. Replacement light bulb can easily be obtained from a good local electrical or DIY store.

12

EN

Image 12
Contents CS 6914 APW Please read this manual first Your refrigerator Your refrigerator Page Electrical Requirements IMPORTANT! Fitting a Different PlugEnergy Saving Tips Installation Please remember that Disposing of the packaging Installation Instructions Transportation InstructionsPage Replacing the Interior Light Bulb Reversing the Doors Page Reversing the doors Before operating Final CheckUsing your refrigerator Temperature Control and AdjustmentSuggested Arrangement of FoodFRIDGE/FREEZER Storing Frozen Food Freezing Fresh FoodMaking ICE Cubes DefrostingMaintenance and cleaning Do’s and Don’ts Problem Solving Guarantee Details HOW to Obtain Service Part no 57 1230