Beko CFD6914APS, CFD6914APB, CFD6814APW manual Reversing the Doors

Page 11

REVERSING THE DOORS

We recommend that you reverse doors before switching on for the first time.

Tools required: Small and medium size flat and cross-headed screwdrivers, a pair of pliers.

Spare Parts supplied in the plastic bag: The following parts, which are exclusively for left hand side fitted hinge operation are supplied in a plastic bag with the appliance:

-Upper door top trim hinge covers – there are 2 different parts, one for each side of top trim.

-Upper door middle hinge bushing/ door stopper assembly.

We suggest you keep all the parts supplied in the plastic bag and also parts, which have been removed when reversing doors, in a safe place for possible future, re-use.

IMPORTANT: We suggest you ask somebody to help you when moving the appliance around and to hold doors when removing / re-fitting hinges and doors to avoid any injury and damage to the product.

Please refer to diagrams supplied. To follow numbers in brackets below, refer to the main diagram.

1.Switch off the appliance at the socket outlet and pull out the mains plug.

2.Remove all loose items and fittings and food, if any, from inside the appliance and door racks.

3.Gently prise off plastic hinge covers on both sides of upper door top trim and front top panel using a small flat- headed screwdriver. (1)

4.Gently tilt the appliance back against a strong wall on its rear side sufficiently to allow the lower hinge to be removed. Take care to protect the appliance, your wall and floor coverings. You can utilise the original packaging to do this. Once you tilt the appliance back, check to make sure the appliance is completely stable and safe before you carry on. (2)

5.Unscrew and remove the lower hinge using a cross-headed screwdriver while holding the lower door firmly.(3)

6.Remove lower door carefully off the middle hinge and stand door upright in a safe place.(4)

7.Open upper door and unscrew and remove the middle hinge while holding the upper door firmly. Use a flat- headed screwdriver. Middle hinge will need to be rotated 180 degrees before re-fitting on the opposite side.(5)

8.Remove upper door carefully off the upper hinge and stand door upright in a safe place.(6)

9.Unscrew and remove the upper hinge using a flat-headed screwdriver.

(7)

10.Rotate the upper hinge 180 degrees and then unscrew and remove the hinge pin using a pair of pliers and re-fit to opposite side of hinge.(8)

11

EN

Page 10 Page 12
Image 11
Page 10 Page 12
Contents CFD6914APB CFD6914APS CFD6914APW This manual Symbols and their descriptionsPlease read this manual first HOW to Obtain Service Guarantee DetailsYour refrigerator Page IMPORTANT! Fitting a Different Plug Electrical RequirementsEnergy Saving Tips Transportation Instructions InstallationInstallation Instructions Replacing the Interior Light Bulb Reversing the Doors Page Reversing the doors Final Check Before operatingTemperature Control and Adjustment Using your refrigeratorSuggested Arrangement of Food in the FRIDGE/FREEZER Freezing Fresh Food Storing Frozen FoodDefrosting Making ICE CubesFilling in the water tank of water dispenser Water dispenserWater tray Maintenance and cleaning Do’s and Don’ts Problem Solving Important notes What is covered?What is not covered? Republic of Ireland Service once the manufacturers guarantee has expiredModel No Serial No Retailer Part no57 1233

CFD6914APS, CFD6814APW, CFD6914APB specifications

The Beko CFD6914APB, CFD6814APW, and CFD6914APS are innovative refrigeration solutions designed to meet the needs of modern households. Combining advanced technology with user-friendly features, these models enhance food preservation while adding elegance to kitchen spaces.

At the forefront of their design is the NeoFrost technology, which boasts dual cooling systems that maintain optimal humidity levels in both the refrigerator and freezer compartments. This not only prevents the transfer of odors between sections but also ensures that food stays fresher for longer. The even cooling throughout the fridge leads to fewer fluctuations in temperature, which is essential for preserving perishable items.

The Beko CFD6914APB, featuring a sleek black finish, is ideal for those who prefer a stylish aesthetic in their kitchen. The exterior is complemented by a spacious interior, offering a total net capacity of approximately 346 liters. This model includes adjustable shelves, allowing users to customize the space to accommodate larger items or create extra room as needed. Additionally, the anti-fingerprint coating on the exterior makes maintenance hassle-free.

Similarly, the Beko CFD6814APW, presented in a clean white design, emphasizes efficiency with low energy consumption. This model is equipped with an A+ energy rating, ensuring minimized utility costs while being environmentally friendly. The LED lighting provides bright illumination inside the fridge, making it easier to find items quickly.

The CFD6914APS stands out with its stainless steel finish, providing a contemporary look while enclosing advanced perks. This model is designed with a frost-free freezer, eliminating the need for manual defrosting—a true time-saver for busy individuals. Moreover, the quick freeze function ensures that foods are frozen rapidly, locking in nutrients and flavors effectively.

Other notable features across these models include a reversible door, which adds flexibility for installation, and an integrated chilling compartment for safely storing meat and fish at the perfect temperature. The digital display allows for easy monitoring and adjustment of settings to suit user preferences.

In summary, the Beko CFD6914APB, CFD6814APW, and CFD6914APS not only prioritize functionality and efficiency but also feature elegant designs and advanced cooling technologies that cater to the modern consumer's needs. With these models, families can enjoy fresh, delicious food while reducing their impact on the environment.
Top Page Image Contents