Beko CFD6914APB, CFD6814APW, CFD6914APS manual

Page 12

11.Reposition plugs and hinge pin bushings on top of doors on the opposite side of both doors. Use small flat-headed screwdrivers to remove plugs and bushings. Take care not to mark doors.(9)

12.Reposition left hand side feet on the opposite side. Unscrew and reposition the bottom hinge bushing. (10)

13.Unscrew and remove the upper door middle hinge pin bushing/ door stopper using a cross-headed screwdriver. Important: This part cannot be used on the opposite side; left hand side middle hinge pin bushing/door stopper part is supplied in the plastic bag.(11)

14.Re-fit the upper hinge on the left hand side using flat-headed screwdriver.(12)

15.Fit upper door left hand side middle hinge pin bushing/door stopper supplied in the plastic bag using cross- headed screwdriver.(13)

16.Reposition three small plastic plugs on the left hand side, which are covering middle hinge holes, on the opposite side to cover holes left empty.(14)

17.Locate and re-fit upper door to upper hinge and hold the door firmly. (15)

18.Locate the middle hinge pin to middle hinge pin bushing of upper door on the left hand side and re-fit the middle hinge.(16)

19.Reposition the two screws fitted to lower hinge holes on the left hand side at the bottom of the cabinet on the opposite side.(17)

20.Locate and re-fit lower door to middle hinge pin and then re-fit the lower hinge on the left hand side.(18), (19)

21.Carefully stand the appliance upright and adjust the two front feet if necessary.

22.Check that doors open and close easily, they are aligned correctly and that there are no gaps allowing air into the cabinet. If there are gaps between the door seal and the cabinet, adjust the door seal by gently pulling away from the door using fingers.

23.Check that all the hinge screws are tightened. Avoid over tightening the screws.

24.Put all items, fittings back in the appliance.

25.Fit upper door top trim and front top panel plastic hinge covers. Upper door top trim hinge covers are supplied in the plastic bag.(20)

26.Wait for at least 4 hours to allow the system to settle before switching on.

27.Once the correct storage temperatures have been reached in the appliance, put back all the food.

12

EN

Page 11 Page 13
Image 12
Page 11 Page 13
Contents CFD6914APB CFD6914APS CFD6914APW Symbols and their descriptions Please read this manual firstThis manual Guarantee Details HOW to Obtain ServiceYour refrigerator Page Electrical Requirements IMPORTANT! Fitting a Different PlugEnergy Saving Tips Installation Transportation InstructionsInstallation Instructions Replacing the Interior Light Bulb Reversing the Doors Page Reversing the doors Before operating Final CheckUsing your refrigerator Temperature Control and AdjustmentSuggested Arrangement of Food in the FRIDGE/FREEZER Storing Frozen Food Freezing Fresh FoodMaking ICE Cubes DefrostingWater dispenser Filling in the water tank of water dispenserWater tray Maintenance and cleaning Do’s and Don’ts Problem Solving What is covered? What is not covered?Important notes Service once the manufacturers guarantee has expired Model No Serial No RetailerRepublic of Ireland Part no57 1233

CFD6914APS, CFD6814APW, CFD6914APB specifications

The Beko CFD6914APB, CFD6814APW, and CFD6914APS are innovative refrigeration solutions designed to meet the needs of modern households. Combining advanced technology with user-friendly features, these models enhance food preservation while adding elegance to kitchen spaces.

At the forefront of their design is the NeoFrost technology, which boasts dual cooling systems that maintain optimal humidity levels in both the refrigerator and freezer compartments. This not only prevents the transfer of odors between sections but also ensures that food stays fresher for longer. The even cooling throughout the fridge leads to fewer fluctuations in temperature, which is essential for preserving perishable items.

The Beko CFD6914APB, featuring a sleek black finish, is ideal for those who prefer a stylish aesthetic in their kitchen. The exterior is complemented by a spacious interior, offering a total net capacity of approximately 346 liters. This model includes adjustable shelves, allowing users to customize the space to accommodate larger items or create extra room as needed. Additionally, the anti-fingerprint coating on the exterior makes maintenance hassle-free.

Similarly, the Beko CFD6814APW, presented in a clean white design, emphasizes efficiency with low energy consumption. This model is equipped with an A+ energy rating, ensuring minimized utility costs while being environmentally friendly. The LED lighting provides bright illumination inside the fridge, making it easier to find items quickly.

The CFD6914APS stands out with its stainless steel finish, providing a contemporary look while enclosing advanced perks. This model is designed with a frost-free freezer, eliminating the need for manual defrosting—a true time-saver for busy individuals. Moreover, the quick freeze function ensures that foods are frozen rapidly, locking in nutrients and flavors effectively.

Other notable features across these models include a reversible door, which adds flexibility for installation, and an integrated chilling compartment for safely storing meat and fish at the perfect temperature. The digital display allows for easy monitoring and adjustment of settings to suit user preferences.

In summary, the Beko CFD6914APB, CFD6814APW, and CFD6914APS not only prioritize functionality and efficiency but also feature elegant designs and advanced cooling technologies that cater to the modern consumer's needs. With these models, families can enjoy fresh, delicious food while reducing their impact on the environment.
Top Page Image Contents